|
[China]
Trade Verify
Address: Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Contact name:Yingkai Zhang
KSQ Technologies (Beijing) Co. Ltd |
|
Verified Suppliers
|
|
|
Chisel Drill Bit connected to Hex22 Shank Rod used for light-duty rock drill Y6
Our drill bits are made with high quality alloy steel bar and tungsten carbides, through heat treatment.
Caracteristique:
(1)Button bit taper angle: 4°,4°46″,6°,7°,11°,12°
(2)Models:chisel bit/cross bit/button bit
(3)Diam:20-45 mm
(4)Button bit shape:spherical/parabolic
(5)Socket inside diameter:15/19/22/25(mm)
Application
Widely used in drilling holes with depth less than 5 meters and diameter ranged in 20-45 mm by light-duty rock drill, like Y6.
Product Codes System:
Tapered Button Bits:
|
Tapered Chisel Bits:
|
Tapered Cross Type Bits:
|
|
Product Description
Tapered button bit to drill quarry granite rock
Bit diameter: 32mm to 42mm
Body height: 50mm, 55mm,60mm
Taper/Grade: 6 degree, 7 degree, 11 dregree, 12 degree
Shank Diameter: for Hex22 tapered rod
Description | Diameter | Length | Water hole | |
Taper degree: 4°, 6°, 7°, 11°, 12°
| mm | mm | 2 | |
20 | 65 | 2 | ||
23 | 65 | 2 | ||
25 | 69 | 2 | ||
28 | 60 | 2 | ||
30 | 55 88 | 2 | ||
32 | 55 64 71 80 | 2 | ||
34 | 71 80 | 2 | ||
36 | 74 | 2 | ||
38 | 74 | 2 | ||
40 | 74 | 2 | ||
42 | 74 | 2 | ||
45 | 74 | 2 | ||
Related productions
Taper button bit - For 22 mm (7⁄8") hex. Rod | ||||||||||
| Bit Diameter | mm | 32 | 33 | 34 | 35 | 36 | 38 | 40 | 42 |
inch | 1 1/4 | 1 2/7 | 1 1/3 | 1 3/8 | 1 3/7 | 1 1/2 | 1 4/7 | 1 2/3 | ||
| Tungsten Carbide Button Number | 4, 6, 7 | ||||||||
Taper/Grade | 6,7,11,12 degree | |||||||||
drill bit | broca | broca | foret | Bohrer | matkap ucu | punta da trapano | boorpunt | jesie | boret drill bit | broca | broca | foret | Bohrer | matkap ucu | punta da trapano | boorpunt | jesie | boret tapered tungsten carbides knock off drill bit
Other products related:
(1) Integral Drill Rod– chisel bit integral rod, plug hole integral drill steel,
Shank H19 x 108mm and H22 108mm.
(2) Tapered Rock Drill Tools - chisel bit, cross bit, button bit,
drill rod of taper 7, 11, 12 degree
(3) Threaded Rock Drill Tools - button bit, retrac button bit, drop
center button bit, dome bit, reaming bit,extension rod, MF-Rod, Hex
rod, coupling sleeve, crossover coupling of thread R25, R28, R32,
R38, T38, T45, T51, ST58, ST68.
(4) Shank Adapters (Striking Bars) - equivalent to Atlas Copco, ,
Furukawa, Gardner Genver, Ingersoll Rand etc.
(5) Down-the-hole (DTH) Bits & Hammers - 3'', 4'', 5'', 6'',
8'', 10", 12" hammers and DTH button bits (diameter 80mm - 445mm)
