Active Member
|
[China]
Address: NO.28988 Jingshi Road, Huaiyin District, Jinan, China
Contact name:Judy Chen
Sino Construction Equipment Co., Ltd |
|
|
Stability Construction Motor Grader 160HP GR165 Earth Moving Equipment
XCMG Construction Motor Grader 160HP GR1653 Motor Graders Small Mini Tractor Road Wheel Motor Grader
Product Description of Construction Motor Grader 160HP GR1653 Motor Graders
The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Advantages and Highlights:
1. The articulation frame is adopted and matched with the steering
of the front wheel, With small turning radius ,maneuvering and
flexible.
2. The electro-hydraulic controls the power shift gearbox ,with
6ahead gears and 3 back gears.
3. The international matching hydraulic parts are adopted ,with
reliable operation.
4. The motions of the blade are fully hydraulically controlled.
5. The rear axle is the three-section driving axle which is
provided with the NO-SPIN self-locking differential mechanism.
6. The manipulation table and seats are adjustable. The arrangement
of the manipulation handle and instruments are reasonable ,with
convenient application ,and the comfort of driving is improved .
7. The cab is grand and nice ,with wide eyeshot and good sealing .
8. The front bulldozing plate, rear scarification device , front
scarification harrow and automatic leveling device can be added.
Product Parameters of Construction Motor Grader 160HP GR1653 Motor Graders
Basic specification | |
Engine model | SC7H180.1G3 |
Rated power/speed | 128kW/2000rpm |
Dimension(LxWxH) | 8900×2625×3420mm |
Operating weight(Standard) | 15000kg |
Performance specification | |
Travelling speed ,forward | 5,8,11,19,23,38 km/h |
Travelling speed ,reverse | 5,11,23 km/h |
Tractive force(f=0.75) | 77KN |
Max. gradeability | 20% |
Tire inflation pressure | 260 kPa |
Working hydraulic pressure | 20 MPa |
Transmission pressure | 1.3~1.8MPa |
Operating specification | |
Max. steering angle of front wheels | ±48° |
Max. lean angle of front wheels | ±17° |
Max. oscillation angle of front axle | ±15° |
Max. oscillation angle of balance box | 15 |
Frame articulation angle | ±27° |
Min. turning radius using articulation | 7.3m |
Blade | |
Maximum lift above ground | 450mm |
Maximum depth of cutting | 500mm |
Maximum blade position angle | 90° |
Blade cutting angle | 28°—70° |
Circle reversing rotation | 360° |
Moldboard width X height | 3965×610mm |
Main characteristics:
Hydraulic transmission controlled by electricity
Working equipment controlled multi valve, short operating bar,
adjustable operating table, instrument No-spin(differential),
planetary speed-reduction transmission system
Hydraulic brake system
Hydraulic steering system
Cabin equipped structure can make the biade tilt by 900 tum round
by 3600
Air conditione
Photo of Construction Motor Grader 160HP GR1653 Motor Graders
