Active Member
|
[China]
Address: NO.28988 Jingshi Road, Huaiyin District, Jinan, China
Contact name:Judy Chen
Sino Construction Equipment Co., Ltd |
|
|
Shantui Sd22 Bulldozer 4.9m3 Straight Blade With Three Tooth Soil Ripper
Road Construction Bulldozer Shantui SD22 Bulldozer 4.9m3 Straight Blade With Three Tooth Soil Ripper
Introduction of Shantui SD22 Bulldozer 4.9m3 Straight Blade With Three Tooth Soil Ripper
SD22 hydraulic bulldozer is a hydraulic transmission bulldozer developed by Shantui. Its technology reaches the domestic leading level. This product inherits more than 30 years of bulldozer production experience from Shantui, with excellent quality and stable and reliable performance. Mainly suitable for road, railway, airport and other ground pushing, excavating, backfilling earth and stone, and other bulk operations. It is an indispensable mechanical equipment for national defense engineering, urban and rural road construction and water conservancy construction.
The SD22 standard bulldozer re-launched the NT855-C280S10 engine with powerful power, high efficiency and energy saving. High-reliability power shift transmission, stable torque converter, and final transmission with straight spur gear structure can all transmit power efficiently, with higher transmission power and efficient production efficiency. The engine can work normally and reliably under any load conditions and any thermal environment required by the user without causing the engine to overheat.
Features of Shantui SD22 Bulldozer 4.9m3 Straight Blade With Three Tooth Soil Ripper
● NT855-C280S10 engine, strong power, high efficiency and energy saving.
● High-reliability power shift transmission, stable torque converter, and final transmission with two-stage straight-tooth structure can all transmit power efficiently, with high transmission power and efficient production efficiency.
● The engine can work normally and reliably under any load conditions and any thermal environment required by the user without causing the engine to overheat.
● It can realize automatic fault diagnosis and full monitoring. The integral cast-molded instrument panel integrates air-conditioning, electrical appliances, and meters into one, which is more beautiful and high-end.
● Main frame with full box structure, which uses high-performance materials and high-strength castings, has a high ability to bear impact loads and resistance to bending and torsion. High-quality welds ensure that the main frame has a full life cycle.
● The semi-rigid suspension traveling system increases the ground contact area of the track and improves the traction of the vehicle.
● According to ergonomics, the driver's seat and armrest can be easily adjusted up, down, forward, backward, shifting, steering and throttle control are placed on the left side, and the flexible shaft structure is used. To make the handling process more portable and flexible, reduce fatigue.
● The standard straight tilt bulldozer has strong cutting force and can cope with various difficult working environments; large single-tooth ripper with adjustable soiling angle can be used for loosening of clay, frozen soil and other soil layers. It can also be used to peel off harder working surfaces such as gravel and compacted salt mines.
Technical specification of Shantui SD22 Bulldozer 4.9m3 Straight Blade With Three Tooth Soil Ripper
| Model | SD22 (standard) | SD22C(coal) | SD22W(stone) | SD22F(Forest) |
| Performance parameter | ||||
| Operating mass (kg) | 23450 | 24000 | 23600 | 24700 |
| Minimum turning radius (mm) | 3300 | 3300 | 3300 | 3300 |
| Ground specific pressure (kPa) | 66 | 57.5 | 66 | 64 |
| engine | ||||
| engine model | WP12/QSNT-C235 | WP12/QSNT-C235 | QSNT-C235 | QSNT-C235 |
| Rated power / rated speed (kW / rpm) | 175/1800 | 175/1800 | 175/1800 | 175/1800 |
| Overall dimensions | ||||
| Length (mm) | 5495 | 5820 | 5495 | 5495 |
| Width (mm) | 3725 | 4200 | 3725 | 3725 |
| Height (mm) | 3402 | 3402 | 3402 | 3402 |
| Walking performance | ||||
| Forward speed (km / h) | F1:0-3.6 F2:0-6.5 F3:0-11.2 | F1:0-3.6 F2:0-6.5 F3:0-11.2 | F1:0-3.6 F2:0-6.5 F3:0-11.2 | F1:0-3.6 F2:0-6.5 F3:0-11.2 |
| Backward speed (km / h) | R1:0-4.3 R2:0-7.7 R3:0-13.2 | R1:0-4.3 R2:0-7.7 R3:0-13.2 | R1:0-4.3 R2:0-7.7 R3:0-13.2 | R1:0-4.3 R2:0-7.7 R3:0-13.2 |
| Ground clearance (mm) | 405 | 405 | 405 | 405 |
| Chassis system | ||||
| Track center distance (mm) | 2000 | 2000 | 2000 | 2000 |
| Track shoe width (mm) | 560/610/660 | 660 | 560/610/660 | 610/660 |
| Grounding length (mm) | 2730 | 2730 | 2730 | 2730 |
| Number of track shoes (piece / single side) | 38 | 38 | 38 | 38 |
| Chain track pitch (mm) | 216 | 216 | 216 | 216 |
| Number of supporting wheels (single side) | 2 | 2 | 2 | 2 |
| Number of rollers (single side) | 6 | 6 | 6 | 6 |
| Fuel tank capacity | ||||
| Fuel tank (L) | 450 | 450 | 450 | 450 |
| Working hydraulic oil tank (L) | 110 | 110 | 110 | 110 |
| Traveling hydraulic oil tank (L) | —— | —— | —— | —— |
| working equipment | ||||
| Blade type | Straight shovel, angle shovel, U-shaped shovel, semi-U | Push coal shovel | Rock straight shovel, rock angle shovel, rock U-shaped shovel, rock semi-U shovel | Straight shovel, angle shovel, U-shaped shovel, semi-U |
| Blade width (mm) | 3725,4365,3800,3725 | 4200 | 3725,4365,3800,3725 | 3725,4365,3800,3725 |
| Blade height (mm) | 1315,1055,1343,1374 | 1350 | 1315,1055,1343,1374 | 1315,1055,1343,1374 |
| Working capacity (m³) | 4.9,3.5,7.0,6.0 | 8.3 | 4.9,3.5,7.0,6.0 | 4.9,3.5,7.0,6.0 |
| Blade lifting height (mm) | 1210 | 1210 | 1210 | 1210 |
| Shovel depth (mm) | 540 | 538 | 540 | 540 |
| Ripper type | Single tooth, three tooth | Single tooth, three tooth | Single tooth, three tooth | Single tooth, three tooth |
| Soil loosening depth (mm) | Single 695 three 666 | Single 695 three 666 | Single 695 three 666 | Single 695 three 666 |
| Ripper lifting height (mm) | Single 515 Three555 | Single 515 Three555 | Single 515 Three555 | Single 515 Three555 |
| Winch | —— | —— | —— | Mechanical winch |
FAQ:
1. How long will take to delivery the goods after placing an order?
It will take about 7days after getting the deposit if we have machine in stock. Some customized goods will need about 30days to delivery.
2. If our machines have any problems, When will your side can reply to us?
We will solve your problems immediately once get your message. Usually it will take 1~2hours to give you the solution or explanation.
3. What kind of good policy your can supply if we want to be your distributor?
Special discount and protection of sales area can be provided to your distributor.
4. Which incoterms 2010 terms can we work?
We are a professional and sophisticated international player, can handle all Incoterms 2010 terms, and we normally work on FOB,CFR,CIF,CIP,DAP Etc.
5. What kind terms of payment can be accepted?
For terms of payment, LC,T/T, D/, Western Union can be accepted.
