Henan Harvest Machinery & Truck Co., Ltd |
Verified Suppliers
|
|
Cummins 447kW Power XCMG Road Construction Machinery 2m Crawler Milling Machine XM200
The XM200 is mainly used for maintenance renovation of large-scale asphalt concrete pavement, fine cutting of cement road surface and surface layer milling, cement stabilized soil layer renovation. XM200 is a high efficient economic type milling machine.
1.The two stage belt conveyors are stepless speed control, and the conveying belt can be folded freely by hydraulic pressure.
2. Milling drum is driven by 12 high-strength V-belt to ensure sufficient and effective transmission of power to the cutting edge.
3. A walking driving system with four high wear-resistant rubber trackpads ensures maximum traction performance without reducing the working speed of the machine.
Performance Characteristics
* The anti-torsion chassis is made of high strength material and
steel plates, can resist deformation under various load and terrain
conditions.
* Four crawlers are independently driven by hydraulic motors. All
speed regulation can be operated on the control console at both
sides of the driver.
* Automatic power regulator can let the engine load automatically
finish matching between milling power and driving power.
* The power of diesel engine is transmitted through the clutch and
power conveyor belt to the reducer of milling rotor, in order to
provide the biggest milling power
* The milling machine is equipped with a set of accurate automatic
vertical control device to control the milling depth.
* The spacious central channel- type operating console is equipped
with two seats on the right and left respectively, and the vision
in front of the machine is wide, for the convenience of observing
conveying device and interval on both sides of milling rotor edges.
* The intelligent control system can realize the advanced functions
such as on-line display, trouble diagnosis, trouble warning and
reminding for repair & maintenance when this machine is either
working mode or traveling mode.
Specification
Model | XM200 | ||
---|---|---|---|
Max. milling with | mm | 2000 | |
Max. milling depth | mm | 320 | |
Milling wheel | Number of tools | 168 | |
Drum diameter with tools | mm | 980 | |
Engine | Model | QSX15 | |
Rated power | kW | 447 | |
Rated speed | rpm | 2100 | |
Specifications | Operating speed | m/min | 0~30 |
Travel speed | kmh | 0~5 | |
Ground clearance | % | 80 | |
Ground clearance | mm | ≤300 | |
Operating weight | kg | 32500 | |
Volume | Fuel tank | L | 1300 |
Hydraulic oil tank | L | 400 | |
Water tank | L | 3400 | |
Conveyor | Width | mm | 800 |
Measurement | Overall machinery LxWxH | mm | 7130×2500×3000 |
Conveyor LxWxH | mm | 8000×1150×900 | |
Travel mode | Track |
Picture