Home Companies RKENS TECHNOLOGY CO.,LTD

Components PCB Lead Cutting Machine High Efficiency Low Noise 77x96x107 CM

RKENS TECHNOLOGY CO.,LTD
Active Member

Contact Us

[China] country

Address: No.25,Dong Da North Street, Jin Gong Road,Sha Tou Community,Chang An Town, Dongguan, China

Contact name:Sally Way

Inquir Now

RKENS TECHNOLOGY CO.,LTD

Components PCB Lead Cutting Machine High Efficiency Low Noise 77x96x107 CM

Country/Region china
City & Province dongguan guangdong
Categories Camping
InquireNow

Product Details

Electronic components PCB Lead Cutting Machine , PCB Extra Legs Cutter Machine

Intro:

 

The Automatic PCB lead cutter machine is mainly used for cutting the extra pins of the components after soldering,this machine is assemblyed by precision manufacturing parts. The blade rotate fast and stability , at the same time it's very low noise and high efficiency.

Double rail travel can be adjustable Synchronize,cutting length is easily also adjustable.

 

Suitable:

To use the automatic PCB lead cutting machine, pcb should meet below requirement.

 

1. The pcb size should be within 400x250MM.

2. The PCB board side should have at least 2MM distance from components.

3. The shortest length machine can cut is up to 1.5MM. However if there is components on back side, lead length should be higher than components. For example, there is 3MM height components on bottom side, so after cutting, the lead length should be higher than 3MM. You can not cut lead length lower than 3.0MM.

 

Specification:

 
NameElectronic components PCB Lead Cutting Machine , PCB Extra Legs Cutter Machine
ModelRS-911A
Power Supply380V AC50HZ/60HZ
Shortest cut length1.5MM Cut length is adjustable
Available PCB sizeMax 400x250MM
Blade type200MM Dia, And 250MM Dia for option
Efficiency4500 RPM

Feature:

 

1, Automatic input and output the PCB, cutting the PCB lead after the welding.

2, High stability, it can connect with the automatic soldering machine or AI machine.

3, Applies to the finger type slid to fasten the PCB board.

4, Finger slid change easy and economic.

5, With the prevent bending device, to overcome the bending PCB in welding.

6, Input speed can be adjusted, max. speed is 3m/min.

 

Hot Products

Programmable automatic poly tubing (plastic packaging) and heat shrink tubing Cut length:1-9999MM ...
220V/110V automatic shrink film tubing cutting/cutter machine Cut length:1-9999MM Type: Full ...
Automatic Tube Cutting And Laser Marking Machine Specification: Name RS-100JB Automatic tube cutting ...
2.54MM Pitch Pin Header Cutting Machine/Manual Type Pin Header Cutter Intro: This machine can cut 1...
LCD Touch Screen Semi-automatic Soldering Machine Machine video: https://youtube.com/shorts...
Two Working Platform PCB Soldering Machine For PCB Cable Connection Soldering Intro: YS-HZX542 is ...