|
[China]
Trade Verify
Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Contact name:Alice Du
Shenzhen Rion Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Car Crash Impact Test Sensor 3 Axis MEMS Capacitive Accelerometer Bridge Vibration Monitor
▶ PRODUCT FEATURES
▶ PRODUCT APPLICATION
★ Bridge
★ Automobile
★ Roller
★ Wind power
★ Medical equipment
★ Large machinery and engine
★ Low frequency vibration and automatic monitoring
★ Crash recording, fatigue monitoring and prediction
★ Traffic system monitoring, subgrade analysis and high-speed railway fault detection
Specification
| AKM392 | PARAMETER | UNIT | |||||
| Measure range | ±2 | ±4 | ±8 | ±10 | ±20 | ±40 | g |
| Deviation calibration | <1 | <1 | <1 | <1 | <1 | <1 | mg |
| Measure axis | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | Axis |
| Power on/off repeatability | <2 | <2 | <2 | <2 | <2 | <2 | Mg (Max) |
| Temp. coefficient of deviation | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | %/℃ (typical) |
| Resolution/Threshold (@ 1Hz) | < 1 | < 1 | < 1 | < 1 | < 1 | < 1 | Mg (Max) |
| Nonlinearity | <0.5 | <0.8 | <1 | <1 | <1 | <1 | % FS (Max) |
| Bandwidth (3DB) | 500 | 500 | 500 | 500 | 500 | 500 | Hz |
| Cross-axis sensitivity | 1 | 1 | 1 | 2 | 2 | 2 | % |
| Transverse vibration sensitivity ratio | 1 | 1 | 2 | 5 | 5 | 5 | % |
| Noise density | 21 | 21 | 21 | 86.6 | 86.6 | 86.6 | μg/√Hz |
| Resonant frequency | 2.4 | 2.4 | 2.4 | 5.5 | 5.5 | 5.5 | kHz |
| Automatic output rate of 68 protocol | 5Hz,10Hz,25Hz,50Hz,100Hz,200Hz,500Hz,1000Hz | ||||||
| MODBUS automatic output rate | 10Hz,25Hz,50Hz | ||||||
| Output interface | RS232/RS485/TTL | ||||||
| Communication protocol | Reifen 68 protocol and MODBUS RTU protocol | ||||||
| Input (VDD _ VSS) | 9-36 VDC | ||||||
| Operating current consumption | <60mA @ 12 VDC | ||||||
| Protection | IP67 | ||||||
| Material | aerospace aluminum | ||||||
| Weight | Product net weight: ≤116g, magnetic base: ≤50g | ||||||
| Size | Product size: L36 × W32 × H24mm Size of magnetic adsorption base plate: L36 × W32 × H7mm | ||||||
Size
ELECTRICAL CONNECTION
Color Function | RED | BLACK | WHITE | GREEN |
DC9～36V Positive pole of power supply | GND Negative pole of power supply | RS232(RXD) Or RS485 (D +) | RS232(TXD) Or RS485 (D-) |
PRODUCT MEASUREMENT DIRECTION
