|
[China]
Trade Verify
Address: 3 / F, Building 8, Zhenglong East Road Genzhuyuan ,Matian ,Gongming Shenzhen China Postcode:518106
Contact name:Jerry Wu
Shenzhen Rigoal Connector Co.,Ltd. |
|
Verified Suppliers
|
|
|
M12 male or female scoket
Characteristics of M12 Series
| General Characteristics | ||||||
| Number of contact | 3 | 4 | 5 | 8 | 12 | 17 |
| Locking system | screw M12*1.0 | |||||
| Termination | solder, moulded on cable, crimp or screw clamp | |||||
| Wire guage in mm² | 0.14/0.25/0.34/0.5 etc | |||||
| Wire guage in AWG | 26/24/22/20 etc | |||||
| Shell protection | IP67/IP68 | |||||
| Mechanical operation | >500 mating cycles | |||||
| Upper temperature | +85℃ | |||||
| Lower temperature | -25℃ | |||||
| Electrical Characteristics | ||||||
| Rated voltage | 250V | 60V | 30V | |||
| Pollution degree | III | |||||
| Test voltage | 500V±15V | |||||
| Rated current(40℃) | 4A | 1.5A | ||||
| Contact resistance | ≤10mΩ | |||||
| Insulation resistance | ≥100MΩ | |||||
| Materials | ||||||
| Pin contact | CuZn | |||||
| Socket contact | CuSn | |||||
| Contact plating | Au | |||||
| Upper temperature | PA66(UL 94V-0) | |||||
| Female insent | PA66(UL 94V-0) | |||||
| Material of cable jacket | PVC or PUR | |||||
| Screw | CuZn | |||||
| Nut | CuZn | |||||
M12 Circular Connector is Designed for Washdown and Corrosive Environments, Primarily Used in Factory Automation Applications for Actuators, Sensors, Industrial Ethernet, and Fieldbus.
M12 Series with Ip67/68 Rating, Provides with 2, 3, 4, 5, 6, 8, 12, 17 Contacts, Different Pin Match Specific Applications. E.g, Sensor and Power Applications Require 3 or 4 Pins; Profinet and Ethernet Require 4 or 8 Pin Counts; Fieldbus, Can Bus and Devicenet Typically Use 4 or 5 Pin Counts; and Signal Requirements Usually Employ 12 Pins.
We Supply Full Series of M12 with Field Wireable Connector, Molded Cable Connector, Panel Connector, Overmoled Cables, Wire Harness and Accessories. Pvc (general) or Pur (oil Resistant) Cables Available with Customized Length According to User Requirements.
 | Product diagram
|
 |  |
Certifications
Our Service
Service and Warranty:
1. Low MOQ: It can meet your business very well.
2. Good services: We treat you as our friends.
3. Packaging: Package will do after several discussions with you.
4. Cheap price: The products are directly from our factory. So it
saves a lot secondary cost.
5. Good quality: The MP only will start after you confirm the
samples and the MP products will do 100% inspection before
shipping.
6. OEM accepted: Please send us your design and other important
information. OEM are always welcome.
Package&Shipping:
FAQ
Q1.Are you a manufacturer?
A1: Yes, we are a experienced manufacturer with our own molds and production lines.
Q2.How about quality of products?
A2: Our technicians and QC teams test the products one by one using specail device and instruments.
Q3.How about price?
A3: We are a manufacturer and always offer our customers the most competitive factory price.
Q4.How to play an order?
A4: Contact with online service, or sent an email to us,we will confirm you with product price, specs, packing etc.
Q5.May I buy samples from you?
A5: Yes! You are welcome to place sample order to test our superior quality and services.
Q6.Can I visit your factory?
A6: Yes, welcome to our factory.
Q7.How can I make OEM or ODM orders?
A7: We have different print processing,different OEM orders please contact again or view more items on our alibaba page.
