|
[China]
Trade Verify
Address: Room 1205-1207, Nanguang building, Huafu Road, Futian District, Shenzhen, Guangdong, China
Contact name:Tao
Wisdtech Technology Co.,Limited |
|
Verified Suppliers
|
|
|
BMR4582132/014 Module DC-DC 1-OUT 12V 50A 600W Through Hole
15-Pin Quarter-Brick Tray
| Description | Value |
| Input Voltage | 36 to 75 V |
| Lead Finish | Gold over Nickel |
| Max Processing Temp | 260 °C |
| Number of Outputs | 1 |
| Operating Temperature | -40 to 125 °C |
| Output Current | 50 A |
| Output Power | 600 W |
| Output Voltage | 12 V |
| Pin Count | 15 |
| Product Dimensions | 63.97 x 36.8 x 13.2 mm |
| Supplier Package | Quarter-Brick |
| Switching Regulator | Yes |
| Type | Step Down |
General information
Flex Power DC/DC converters and DC/DC regulators aredesigned in accordance with the safety standards
IEC 62368-1, EN 62368-1 and UL 62368-1 Audio/video,information and communication technology
equipment -Part 1: Safety requirements
IEC/EN/UL 62368-1 contains requirements to prevent injuryor damage due to the following hazards:
• Electrical shock
• Electrically-caused fire
• Injury caused by hazardous substances
• Mechanically-caused injury
• Skin burn
• Radiation-caused injury
On-board DC/DC converters, Power interface modules andDC/DC regulators are defined as component
powersupplies. As components they cannot fully comply with theprovisions of any safety requirements
without “conditions ofacceptability”. Clearance between conductors and betweenconductive parts of the
component power supply andconductors on the board in the final product must meet theapplicable safety
requirements. Certain conditions ofacceptability apply for component power supplies withlimited stand-off
(see Mechanical Information for furtherinformation). It is the responsibility of the installer to ensurethat the
final product housing these components complieswith the requirements of all applicable safety standards
andregulations for the final product.
Component power supplies for general use shall complywith the requirements in IEC/EN/UL 62368-1.
Productrelated standards, e.g. IEEE 802.3af Power over Ethernet,and ETS-300132-2 Power interface at
the input to telecomequipment, operated by direct current (dc) are based onIEC/EN/UL 60950-1 with r
egards to safety
Flex Power DC/DC converters, Power interface modulesand DC/DC regulators are UL 62368-1 recognized
andcertified in accordance with EN 62368-1. The flammabilityrating for all construction parts of the products
meetrequirements for V-0 class material according toIEC 60695-11-10, Fire hazard testing, test flames – 50
Whorizontal and vertical flame test methods.
TP1 = -30 to +95ºC, VI = 36 to 75 V, sense pins connected to output pins unless otherwise specified under
Conditions.Typical values given at: TP1 = +25°C, VI= 53 VI max IO, unless otherwise specified under
Conditions.Additional Cin = 220 µF, Cout = 100 µF. See Operating Information section for selection of
capacitor types.
Features
• Industry standard Quarter-Brick with digital PMBusinterface
58.4 x 36.8 x 13.2 mm (2.30 x 1.455 x 0.519 in)
• High efficiency, typ. 96.4% at half load, 12 Vout
• 2250 Vdc input to output functional isolation
• Baseplate option available
• Meets safety requirements according to IEC/EN/UL62368-1
• PMBus Revision 1.3 compliant
• 8.8 million hours MTBF
• ISO 9001/14001 certified supplier
Power Management
• Configurable soft start/stop
• Precision delay and ramp-up
• Voltage margining
• Voltage/current/temperature monitoring
• Adjustable outp
Shenzhen Wisdtech Technology Co., Ltd are a large-scale supplier specializing in famous semiconductor integrated circuits (ICS) from all over the world.
We have many years of sales management experience, professional
supporting various electronic components, and has a large amount of
stock for a long time.
It mainly Agent of CCTC Advanced Ceramic Capacitors
RICHTEK,SGMRICO ,distributes on AD,XILINX,ST,ALTERA,TI and all
series ICs and Resistor ,inductor and moudles. The products are
widely used in the field of portable electronic products. Based on
technology and market-oriented, We have accumulated rich business
experience and has formed a complete management system. At the same
time, it has established good cooperative relations with
manufacturers and agents in the United States, Europe, Japan, South
Korea and Taiwan, and constantly improved service quality.
Therefore, it has received strong support and high trust from the
majority of users! The business has developed rapidly and has
established long-term friendly cooperative relations with many
traders and manufacturers all over the country. The company always
adheres to the development concept and purpose of "quality first,
reasonable price, quick delivery and service first". It is our duty
to provide the most satisfactory service to the enterprise. Through
a strong market service network system, we provide standardized,
professional, diversified and all-round high-quality services to
the enterprise.
Description
The NCP4200 is an integrated power control IC with an I2Cinterface. It combines a highly efficient, multi−phase,
synchronousbuck switching regulator controller with an I2C interface, whichenables digital programming of
key system parameters to optimizesystem performance and provide feedback to the system.
It uses an internal 8−bit DAC to read a Voltage Identification (VID)code directly from the processor, which is used to
set the outputvoltage between 0.375 V and 1.6 V.
This device uses a multi−mode PWM architecture to drive thelogic−level outputs at a programmable switching
frequency that canbe optimized for VR size and efficiency.
The NCP4200 can beprogrammed to provide 2−, 3−, or 4−phase operation, allowing for theconstruction of up
to four complementary buck−switching stages. TheNCP4200 supports PSI, which is a Power Save Mode.The
NCP4200 includes an I2C interface which can be used toprogram system set points such as voltage offset,
load−line and phasebalance and output voltage. Key system performance data, such asCPU current, CPU
voltage, and power and fault conditions can also beread back over the I2C from the NCP4200.
The NCP4200 operates over the industrial temperature range of−40°C to +125°C and is available in a 40
Lead QFN package.
Features
• Selectable 2−, 3−, or 4−Phase Operation at Up to 1.5 MHz per Phase
• I2C Interface − Enables Digital Programmability of Set Points andRead−back of Monitored Values
• Logic−Level PWM Outputs for Interface to External HighPower Drivers
• Fast−Enhanced PWM for Excellent Load Transient Performance
• Active Current Balancing Between All Output Phases
• Built−In Power−Good/Crowbar Blanking Supports On−The−Fly(OTF) VID Code Changes
• Digitally Programmable 0.375 V to 1.6 V Output Supports BothVR11 and VR11.1 Specifications
• Programmable Short−Circuit Protection with ProgrammableLatchoff Delay
• Supports PSI – Power Saving Mode During Light Loads
Applications
• Desktop PC Power Supplies for VRM Modules
