SA6 6GHz Spectrum Analyzer Signal Generator Wi-Fi 4G LTE CDMA GSM
Beidou GPRS
| Description | frequency analysis |
| Model | SA6-1 |
| | |
The SA6 is a simple portable spectrum analyzer and signal source
designed to display the signal spectrum in the 35 to 6200 MHz
frequency range.
The analyzer finds out the amplitude and frequency of the spectral
component of the process being analyzed. Spectrum analyzers can
handle signals from all widely used technologies: Wi-Fi, 2G, 3G,
4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.
Another important feature is that the tracking generator has
additional functionality, which makes it possible to measure the
frequency response of passive or active devices, such as filters or
amplifiers. The software allows measurement of SWR and return loss
modules. This requires an external directional coupler and a set of
calibration measures.
SA6 is mainly used for field operation. The device is robust,
lightweight and has low energy consumption. It enables service
centers and maintenance teams to perform on-site HF analysis for
commissioning and repair work. In addition, spectrum analyzers are
the perfect solution for repair shops and radio enthusiasts.
For example, you can use the device to:
Place the external antenna on the base station
Rapid analysis of the RF environment
Check the correct operation of the trunk cell
Repair and adjust Repeaters, generators, filters, etc.
Measure SWR when using an external directional coupler.
The device is controlled in one of two ways:
Through buttons and touch screens on the device.
Data between the analyzer and the PC is transferred via a USB
cable.
All measurement data is displayed in real time on the screen of the
device or PC.
Performance parameter
3.2-inch color resistive touch screen
Wide frequency range: 35 to 6200 MHz
Fast scanning of frequency range: 500 points per point
High measurement accuracy: dynamic range of 70-75 dB is 2 dB
Compatibility with Windows-based computers
A device can be used with the help of a PC
Field use is particularly convenient: as low as 380 grams,
measuring 150 x 75 x 23 mm, independent power supply can last up to
4 hours uninterrupted operation, wired data transmission to a PC
Specifications:
Display frequency range: 35-6200 MHz
Measurement frequency range: 35-4500 MHz
Dynamic range in the 35-3000 MHz band: 75 dB
Dynamic range of 3000-4500 MHz band: 70 dB
Maximum span: 6165 MHz
Bandwidth: 200 kHz, fixed
Check the scan speed for bands above 100MHz: 700MHz/sec
Scan 100 MHz: <0.25 seconds
Background noise up to 3000 MHz: <-90 dBm
Background noise 3000-4500 MHz: <-85 dBm
Background noise 4500-6200 MHz: <-80 dBm
Wave impedance: 50 ohms
Standing wave ratio in the operating frequency range: <1,5
Internal attenuator: 0-30 dB
Error for attenuation up to 10 dB: 2 dB
10 to 20 dB attenuation error: 5 dB
20 to 30 dB attenuation error: 8 dB
Tracking generator output power: -15... -25 dBm
Accuracy in dynamic range: 2,0 dB
Maximum input power of attenuator at 0 dB: 10 dBm
Maximum input power for attenuation greater than 20dB: +20dBm
Maximum input measurement signal: +10 dBm
Maximum input DC voltage: 25 volts
Maximum current consumption when running on battery: 450 mA
Maximum current consumption when running from USB: 500 mA (while
charging)
Battery: 2500 mah
Battery life: 3 hours
Battery charging time: ~ 5 hours
Standard configuration (SA6-1) :
- Spectrum analyzer SA6 *1
-SMA-SMA 30cm extension cable *2
-Typc-USB 10cm data cable *1
- Stylus *1
-SMA-KK passes *1
The following are optional accessories, non-standard
Enhanced Configuration (SA6-2)
- Spectrum analyzer SA6 *1
-SMA-SMA 30cm extension cable *2
-Typc-USB 10cm data cable *1
- Stylus *1
-SMA-KK passes *1
-N/SMA-KJ*2
-SMA-J/ NBC-K converter head *2
-SMA interface Spectrum Analyzer test probe *1
