Changzhou Haozhuo Electronic Co., Ltd. |
Verified Suppliers
|
|
6.7mm thickness 100*100 Ferrite tiles for EMC Chamber rf shielding room
Ferrite Tile Size
· Base size: 100*100mm
· Standard height: 5.2mm, 6.7mm
· Diameter of bore: 10mm
Initial permeability | 5500 |
Relative loss factor | 15@0.1MHz |
Saturation flux density | 280(1194A/m) |
Remanence | 180 |
coercivity | 3 |
Relative temp.factor | 3 |
Curie temp. | 90 |
Density | 4.85*1000 |
Resistivity | 100 |
30MHz | -25.5dB |
100MHz | -38dB |
300MHz | -19.5dB |
500MHz | -16dB |
700MHz | -12dB |
1000MHz | -10dB |
Ferrite Tile Application
· Used for EMC chamber
Based on the principle of having complex magnetic permeability equal (or nearly equal) to complex dielectric constant. Materials with this property exhibit an impedance equal to that of "free space" and therefore do not reflect radiated energy at normal incidence. Ferrite Tile can provide 10dB - 25dB of absorption between 30MHz and 1GHz. Tiles are thin (approximately 0.26 inches), but can be heavy (roughly 10 lbs per square foot).
Size for EMC chamber ferrite tile
· Base size: 100*100mm
· Standard height: 5.5mm, 6.7mm
· Diameter of bore: 10mm
Application for EMC chamber ferrite tile Used for EMC chamber
About US