|
[China]
Trade Verify
Address: RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact name:Dannie
Shenzhen Meigaolan Electronic Instrument Co. Ltd |
|
Verified Suppliers
|
|
|
Description of Rohde And Schwarz ZVA40
With its new R&S ZVA family of vector network analyzers, Rohde & Schwarz is taking a future-oriented approach.
The analyzers offer a perfect balance between measurement speed, dynamic range, flexibility and precision, making them ideal for present and future measurement tasks.
Rohde & Schwarz previously set standards in RF and microwave measurements with its R&S ZVR family of network analyzers, and now continues this success with the R&S ZVA.
The fundamental mixing concept employed by the receivers ensures high sensitivity and a wide dynamic range. Extremely fast synthesizers make for short measurement times. Its excellent characteristics, new functionality, sophisticated GUI and extremely high flexibility make the R&S ZVA an indispensable tool for demanding measurement tasks in labs and production.
List of Options
B-B18
| Removable Flash Disk 4GB for ZVA/ZVB with control unit FMR6/5 (factory installed only) |
B-B18
| Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
B-B18
| Removable hard disk 160GB (including firmware) for R&S® ZVA and R&S® ZVB with FMR7 |
B-B4
| Oven quartz (OCXO) for ZVA, ZVB, ZVT |
B-K2
| Time domain (for ZVA, ZVB, ZVT) (software license) |
B-K30
| Noise figure measurement on 2 port devices (for ZVA and ZVT, |
B16
| Direct Generator and Receiver Access for 2 Ports |
B18
| Removable Flash Disc |
B21
| Generator Step Attenuator Port 1; mechanical, 70dB in 10dB-steps |
B22
| Generator Step Attenuator Port 2; mechanical, 70dB in 10dB-steps |
B23
| Generator Step Attenuator Port 3; mechanical, 70dB in 10dB-steps, 40 GHz |
B24
| Generator Step Attenuator Port 4; mechanical, 70dB in 10dB-steps, 40 GHz |
B31
| Receiver Step Attenuator Port 1; mechanical, 35dB in 5dB-steps |
B32
| Receiver Step Attenuator Port 2; mechanical, 35dB in 5dB-steps |
B33
| Receiver Step Attenuator Port 3; mechanical, 35dB in 5dB-steps, 40GHz |
B34
| Receiver Step Attenuator Port 4; mechanical, 35dB in 5dB-steps, 40GHz |
B7
| Measurements on pulsed signals. Pulse Profile,Recording time up to 25ms, up to 30MHz bandwidth |
B7
| Measurements on pulsed signals. Pulse profile,Recording time up to 25ms, up to 30MHz bandwidth |
B8
| External attenuator control. Control unit for electronic attenuators of ZVAZ90E, ZVA-Z110E |
C3
| hree years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
C3
| Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
C5
| Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
C5
| Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
DCV-2
| Documentation of calibration values |
DCV-ZP
| Printout of DCV (additional, in combination with DCV-Option only) |
| K10 | Group delay measurement on converters without LO access. For long distances via LXI network of 2 ZVA or ZVT. |
K17
| Increases the receiver bandwidth to 5MHz (software license) |
K2
| Time domain (for ZVA, ZVB, ZVT) |
K27
| Two internal pulse generators (for ZVA and ZVT) (software license) |
K4
| Mixer- and frequency converting measurements for ZVA and ZVT (software license) |
K5
| Vector corrected mixer measurements (for R&S®ZVA, R&S®ZVT; R&S®ZVA/T-B16 and R&S®ZVA-K4 required) |
K6
| True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
K7
| Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
K8
| Control of frequency converters (for ZVA with f>20 GHz, ZVT20, includes ZVA-K4) |
K9
| Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
R3
| Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
R3
| Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
R5
| Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
R5
| Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
Our service:
One-stop service from manufacture to shipping.
1. Your inquiry related to our products or prices will be replied
in 24hours.
2. Well-trained and experienced staffs to answer all your enquires
influent English.
3. Distributor ship is offered for your unique desigh and some our
current models.
4. Protection of your sales area, ideas of design and all your
private information.
FAQ:
1. Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
