Home Companies ZHENGZHOU SHINE ABRASIVES CO.,LTD

5 Inch 1A1R Diamond Wheels 1.0mm Thickness For Carbide Tools

ZHENGZHOU SHINE ABRASIVES CO.,LTD

Contact Us

[China] country

Trade Verify

Address: 2824,Building B, No.171, Zhongyuan Middle Road, Zhengzhou, Henan 450007, China.

Contact name:Lenny Li

Inquir Now

ZHENGZHOU SHINE ABRASIVES CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

5 Inch 1A1R Diamond Wheels 1.0mm Thickness For Carbide Tools

Country/Region china
City & Province zhengzhou henan
Categories Air Screwdrivers
InquireNow

Product Details

1A1R Diamond Wheels 5 inch Diameter 1.0mm Thickness For Carbide

 

Shine Abrasives 1A1R Diamond Wheels 5 Inch 125mm diameter For Tungsten Carbide tools Cutting off

the cutting off wheels with Resin bond, the thickness is 1.0mm, the wheels bore is 20mm.

Wheels are Good self-sharpening, sharp cutting, flexible binder, can improve surface quality,

mainly used for carbide tools or bars cutting.

 

Drawing of Shine Abrasives 1A1R Diamond Wheels 5 inch Diameter 1.0mm Thickness For Carbide

 

Main sizes form of Shine Abrasives 1A1R Diamond Wheels 5 inch Diameter 1.0mm Thickness For Carbide

Abrasive Material:DiamondBond Type:Resin
Diamond Grit:D151Wheel Diameter: 6inch 150mm
Wheel Bore:31.75mmRim width:7mm
Wheel Thickness:1.0mmWheel core: Steel

Other standard sizes also are available as requested.

 

Precautions for use:

 

1. Please check carefully before installing the cutting wheel, if there is any chip or other damage, please stop using it.

2. When the cutting wheel is marked with the direction of rotation, it should be consistent with the rotation direction of the machine tool. On the contrary, the cutting is not sharp, and it is difficult to exert the performance of the cutting wheel. 3. Please do not use cut-off wheels that do not meet the requirements.

4. If any abnormality is found during the cutting process, stop the machine immediately and investigate the cause.

5. When the cutting is not sharp, the grinding wheel should be trimmed and edged. If you continue to use it, there will be overheating and overloading, which may damage the grinding wheel.

6. During the rotation of the grinding wheel, it is strictly forbidden to cut by hand, let alone touch the sand with hands and body.

7. The cutting wheel is forbidden to be used for operations other than grooving or cutting to avoid abnormality due to uneven force.

 
Application picture for reference.
 
Attention:Workers should ensure that you are fully informed on the safe operation of abrasive cutting and grinding wheels
 

Hot Products

Helical Shape CBN Sharpening Wheel For Kitchen Knives And Scissors Shine Abrasives grinding wheel ...
6 Inch 150mm Cbn Grinding Wheel Electroplated Bond With 6061 Aluminium Body​ Shine Abrasives Cubic ...
50mm electroplated CBN Grinding Wheel For Sharpening Knives Scissors Shine Abrasives grinding wheel ...
Products Description Electroplated CBN Grinding wheel for band saw blade sharpening bandsaw sawmill ...
Name antique grinding wheel sharpening stone for sale / anchor grinding wheel Bond Electroplated ...
Abrasive Material CBN Bond Type Electroplated CBN Grit 120 grit Wheel Diameter 120mm Wheel Bore 5/8 ...