WQ-CS-101 Waterproof And Anticorrosive Coating
Product Introduction
WQ-CS-101 is a new generation epoxy asphalt waterproof and
anticorrosive coating. It is a high-performance water-based
one-component epoxy emulsion independently developed by Wangqin and
a self-developed multifunctional modified asphalt as the main raw
materials. Excellent additives give it high-efficiency
anti-corrosion properties and excellent waterproof and impermeable
properties.
Characteristics
- Has excellent acid, alkali and salt resistance;
- Contains high-performance epoxy emulsion with strong permeability
and bonding strength
- Epoxy emulsion with multifunctional modified asphalt has excellent
waterproof, moisture-proof, anti-corrosion and anti-permeability
- Water-based and environmentally friendly, and easy to construct,
can be painted, sprayed or rolled;
- Used in diversified ways, and can be used as primer, intermediate
coat (with powder prepared by Linte), and top coat
Application
- It can be widely used for the anti-corrosion of equipment and
pipelines of steel or concrete structures such as chemical plants,
sewage treatment plants, oil refineries, etc.;
- It can be used for the protection of oil, gas and water pipelines
in oil fields, urban tap water, gas, and heating pipelines;
- Suitable for all kinds of basement and roof waterproof and
anti-seepage projects
- Construction joints, cracks, wall pipes, drains, etc
Construction
- This product is suitable for spraying, roller coating, brushing and
other construction methods, and is suitable for wet base surface
construction without water
- Pre-treatment of this product construction:
- Cement base surface, remove the drum, repair the uneven hollow
drum, apply the diluted black diamond after cleaning;
- Metal base surface, polish the base surface and ensure the base
surface There is no oil and dust;
- Asphalt base surface, clean up the debris, and apply the diluted
black diamond after cleaning
- Grassroots treatment, clean interface, dilute with black diamond
three-in-one coating with purified water 1:1 and evenly coat,
spray, roll, brush;
- After the base layer is dry, carry out the intermediate coating
construction, mix the black diamond three-in-one paint and Linte's
special filler according to the specified ratio, stir evenly, and
then scrape, roll, brush, and spray;
- After the base surface is solidified, carry out the top coat
construction, and directly use the black diamond three-in-one paint
for spraying, rolling and brushing.
Note: The top coating is optional, and good anti-corrosion effect
can be achieved without top coating, and the effect is better.
Precautions
- It is not recommended to use this product if the temperature is
below 5℃
- This product can be used immediately after opening the barrel, or
mixed with WQ specific powder, it is strictly prohibited to use
other materials
- It can be constructed on a damp foundation, but the open water must
be removed, and open-air construction is not allowed on rainy days
- Soak in water only after the film is dry;