Home Companies Briture Co., Ltd.

48mm Polypropylene Fiber Wave Form For Bridge And Tunnel Roof

Briture Co., Ltd.

Contact Us

Trade Verify

Address: Room 1306, Block C, Blue Ocean building, Qianshan Road, Hefei, China.

Contact name:Linda Qiang

Inquir Now

Briture Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

48mm Polypropylene Fiber Wave Form For Bridge And Tunnel Roof

City & Province hefei
InquireNow

Product Details

 
PP fiber wave form 
 
Products Description
 
Product name
PP Fiber Wave Form
Diameter
0.9+/-0.1 mm
Length
30-60mm
Tensile Strength
> 400Mpa
Crack Elongation
> 15%
Melting Point
 
160-170
Elastic Modulus
> 5000Mpa
Acid & Alkali Resistance
 
Strong
 

Introduction

PP fibre Wave form can be instead of steel fibre in cement concrete for anti- crack. Easy to disperse and construct.
 
USAGE: 1 . Suggestion of Additive rate: 5 . 4 kg fibre in one cubic meter concrete. (not less than 2 . 7kg/M3)
2 . Technic of mixture: Put the fibre into detritus first, then put grit to mix for about 2 minutes, to make the fibre be dispersed. Then put cement and water to mix as per normal technic.
 
Application
 
Shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of the higher requirements of the project, such as mining and water conservancy and hydropower projects
 
Product packaging

1)in PE bag and pressed package
in PE bag of 4kgs each 5520kgs/1X20`FCL and 12960kgs1X40`HQ with pallet

2)Packed with water soluble film and in carton box
20kgs each carton, 9600kgs/1X20`FCL or 21600kgs/1X40`HQ with pallet.

 
 

 

 

Certificate

 

Hot Products

White Powder B-VMCH Similar to VMCH of Dow Chemical For Primer And Inks For Golden And Silver Card ...
Thermoplastic solid acrylic resin BA-725 (Be similar to Degalan LP 64/12 ) Resolvable: It is Solid ...
White Beads Solid Acrylic Resin BA-HV For Exterior Coating And Fire-Retardant Coating Solid Acrylic ...
Softenting Point 185- 195℃ Solid Acrylic Resin BA-15 For Heat Transfer Printing Introduction: Solid ...
Solid Acrylic Resin BA-66 For Plastic Coating And Container Coating Solid Acrylic resin Representati...
Excellent Adhesion Solid Acrylic Resin BA-44 For Fluorocarbon Coating And Paints and Inks Solid ...