Home Companies Briture Co., Ltd.

0.20mm Polyvinyl Alcohol PVA Fiber For Cement / UHPC Concrete

Briture Co., Ltd.

Contact Us

Trade Verify

Address: Room 1306, Block C, Blue Ocean building, Qianshan Road, Hefei, China.

Contact name:Linda Qiang

Inquir Now

Briture Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

0.20mm Polyvinyl Alcohol PVA Fiber For Cement / UHPC Concrete

City & Province hefei
InquireNow

Product Details

UHPC Special Synthetic Fibre

 

 

Product Description

UHPC special synthetic fiber uses hydrophilic modification technology for its surface treatment.
It has excellent dispersibility in UHPC, and has good bonding performance with cement matrix materials, which can effectively reduce and
inhibit UHPC plastic shrinkage, drying shrinkage, Micro-cracks caused by temperature changes and other factors significantly improve crack
resistance, toughening , impact resistance, fire and explosion resistance of UHPC.

UHPC fibers are unique in their ability to create a fully-engaged molecular bond with mortar and concrete that is 300% greater than other fibers.

 

 

Applications

  1. Building decoration exterior wall
  2. UHPC carved artwork
  3. Cement Flower pot products
  4. Municipal road bricks etc.
  5. shotcrete and precast

 

Benefits

No rusty

Reduces the formation of plastic shrinkage cracking in concrete.

Self compact

Cost saving, easier to use,to disperse and safe to handle.

Excellent dispersity

Improves impact, shatter and abrasion resistance of concrete.

Light and artistic

Prevent water seepage and prolong the life of the building.

Colourfull

Can be used in highly corrosive circumstance.

 

Technical Information

 

Fibre DimensionD:0.2mm; L:6/12mm
Minimum Tensile Strength>950MPa
Modulus>12GPa
Elongation at break≤30%
Density1.4g/cm3
Acid &Alkali ResistanceExcellent
Moisture Content≤0.1%
AppearanceTransparent monofilament

 

 

Guidelines for use
Dosage: the usual dosing amount is 5.0-50.0kg /m3( the corresponding volume dosing amount is 0.4-4.0%).

Length: The length of UHPC should be 6-12mm. According to different thicknedd of components.

Stirring: After mixing the UHPC powder and water to make the slurry evenly, add the fibers, and then stir for 2 to 4 minutes, subject to the
uniform dispersion of the fibers.

Curing: The construction and curing process of UHPC after adding fiber is exactly the same as the system without fiber


Packing
10 or 20kg/big bag, 700kg/pallet , 7000kg /20 ‘container , 14000kg / 40 ‘container

 

 

 

Hot Products

Chlorinated rubber CR 30 Features Chlorinated rubber CR30 is wear resistance, weather resistance, ...
Chlorinated rubber CR-10 Features CR-10 chlorinated rubber has some obvious features, such as wear ...
German Pergut S5 S10 S20 S40 Chlorinated Rubber resin Cr5 Cr10 Cr20 Cr40 for Paint and Coating ...
Industrial Grade White or pale yellow powder Pergut S20 Chlorinated Rubber Cr30 for Coating Product ...
Product Description Chlorinated rubber is White or pale yellow powder. Specification Product name ...
Product Description Chlorinated rubber CR10 is White or pale yellow powder, it is similar to Pergut ...