|
Trade Verify
Address: Room 1306, Block C, Blue Ocean building, Qianshan Road, Hefei, China.
Contact name:Linda Qiang
Briture Co., Ltd. |
|
Verified Suppliers
|
|
|
Polypropylene Fiber Wave Form for shotcrete
Properties:
PP fibre Wave form can be instead of steel fibre in cement concrete for anti-crack. Easy to disperse and construct.
Usage:
1. Suggestion of Additive rate: 5.4kg fibre in one cubic meter concrete. (not less than 2.7kg/M3)
2. Technic of mixture: Put the fibre into detritus first, then put grit to mix for about 2minutes, to make the fibre be dispersed. Then put cement and water to mix as per normal technic.
Specification:
| Raw material | 100% virgin PP |
| Fiber Type | Wave Form |
| Length (mm) | 40, 48, 50, 54 |
| Fiber Diameter (mm) | 0.9 (+/-5%) |
| Melting Point | 160-170 |
| Tensile Strength (Mpa) | 450 min. |
| Crack Elongation (%) | 15-20 |
| Elastic Modulas (Mpa) | 5000 min. |
Typical Application
Shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of the higher requirements of the project, such as mining and water conservancy and hydropower projects.
Packing:
5kgs, 10kgs or 20kgs each box
