Shanghai kangquan Valve Co. Ltd. |
|
Through Conduit Resilient Seated Gate Valve Flow Control Rigid Round Body
Resilient Seated Gate Valve FEATURES
⊙ Anti- corrosion
Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of
Corrosion resisting and raise the quality of
water supply.
⊙ Ruggedization
The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop
rupture depend on the good mechanics capability of ductile iron .
⊙ Three “○” sealed ring
With the three “O” – rings, the leakage can be greatly reduced and the “O” – ring can be
replaced under this condition with pressure and without stopping water. The thrust axletree
reduces the frictional resistance and lowers the operational torque. And it can be switch seal
ring without opening and closing.
⊙ Rigid round body
The body is founded minutely, the rigid geometry size ensure inner sealing of valve without any
process.
⊙ Light weight
This body is made of ductile iron, it is 20%-30% lighter than the olds. Easily to fixing and
servicing.
Resilient Seated Gate Valve Specifications:
NO | Part name | Material |
1 | Body | Ductile cast iron |
2 | Wedge | Ductile cast iron + EPDM |
3 | Stem nut | ZCuAl10Fe3 Gunmetal |
4 | Gasket | EPDM |
5 | Bonnet | Ductile cast iron |
6 | Gland gasket | ZCuAl10Fe3 Gunmetal |
7 | Stem | 2Cr13 S.S.x 20Cr13 |
8 | Gland | Ductile cast iron |
Resilient Seated Gate Valve APPLICABLE STANDARDS
⊙ American Standard
Design to ANSI/AWWA C509
Face to face dimension to ASME B16.10-2000(ISO 3 series)
Flange and drilling To SME/ANSI B16.42-1998
⊙ British Standard
Design to BS5163,BS5150
Face to face dimension to BS5163(ISO 3series,ISO19 series)
Flange and drilling To BS4504 part1(EN1092)