Front Axle Right OEM 31126855742 Vehicle Control Arm

Auto Parts Control Arm OEM 31126855742 Front Axle, Right For BMW

Specifications:

About Control Arm:

In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel.

The inboard (chassis) end of a control arm is attached by a single pivot, usually a rubber bushing. It can thus control the position of the outboard end in only a single degree of freedom, maintaining the radial distance from the inboard mount. Although not deliberately free to move, the single bushing does not control the arm from moving back and forth; this motion is constrained by a separate link or radius rod.

This is in contrast to the wishbone. Wishbones are triangular and have two widely spaced inboard bearings. These constrain the outboard end of the wishbone from moving back and forth, controlling two degrees of freedom, and without requiring additional links.

Most control arms form the lower link of a suspension. A few designs use them as the upper link, usually with a lower wishbone. The additional radius rod is then attached to the upper arm.

Car Model :

About Us:
 
Our company specialized in auto spare parts since 2002, supply all kinds of auto parts with rich experience , proven technique. Especially for chassis parts: engine mount, control arm, brake pads, brake disc, brake caliper, bearing , hub bearing, steering rack , tir rod end, rack end, ball joint, and electrical parts: sensor, clock spring, window switch, spark plug, ignition coil, injector, fuel pump, and lots of HONDA spare parts for Accord, Civic, Crv , Fit, City, Odyssey. 

We Also Supply Following Goods:

1		48702-60130	REAR BEAM ARM	UZJ200 URJ202
2		48702-60140	REAR BEAM ARM	UZJ200 URJ202
3		48706-60030	REAR BEAM ARM	FZJ80 HZJ81
4		48655-60030	LOWER ARM	RZJ120 KDN215
5		48654-60030	LOWER ARM	RZJ120 KDN215

FAQ:

1. Q: If you don't find the model type here, Please tell us.

A: Please send us your OEM number.
Please send us your photos and products size if you have.
Please tell us your exact car model if you do not have photo or OEM number.

2. Q: How can you guarantee the quality?

A :All products have to pass strict inspection before leaving factory.

3. Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

4. Q: What is the MOQ for each item ?

A :If the items we have stock, there is no limitation for MOQ.

5. Q: What will you do for quality complaint?

A :We will respond to customer within 24 hours.

B :Our QC will check the same stock items, if confirmed it is quality problem, we will make corresponding compensation

Contact us:

If you have any questions, please feel free to contact with us. We would be very glad to help you. We will get back to you within 24 hours or get back to you immediately.