Vertical 90kw 4000kg/H Screw Oil Press Machine

Model Is DYZ45A-1 Rendering Screw Oil Press Oil Expeller Machine

 Features

    1. Accurate energy control and fast response speed The pressurizing energy can be pre-set simply and accurately, and each stroke repeatedly implements accurate and precise pressurization without any discrepancy to ensure the uniformity of the product. The servo motor is directly driven, without the reaction time of the clutch, and the running response speed is fast.

    2. Reasonable structure, more uniform products Since there is no structural bottom dead center, there is no need to worry about excessive load due to material size exceeding or uneven heating temperature, and sliding jam (seizing stop due to overload). Moreover, the same material can be repeatedly pressurized with different strength to gradually deform it, and forging is carried out successively.

    3. Fast molding speed, prolong the life of the mold When the screw press is close to the bottom dead center, the slide speed is extremely fast, and the time for the die to extrude the material is very short, and the processing can be completed instantly before the hot material is cooled. The contact time with the mold is short, and the mold temperature does not change much, which greatly extends the life of the mold.

    4. Simple structure, low maintenance cost Servo motor is directly driven, with simple structure and fewer parts, and low maintenance and maintenance costs. Normal operation, no brake is required, and the motor itself can stop the slider. Mechanical brakes are only used for double protection, and are used in emergency situations such as power outages, and the brake pads have an extremely long service life.

    5. The energy process can be controlled at will, with a wide range of applications The servo numerical control press can set the pressure energy to make the slider first accelerate and descend, and then decelerate to pressurize the material with the set energy. Large-tonnage presses can also forge small parts, and the processing time per unit stroke is basically unchanged. Both large and small, have a multiplier effect.

    6. High efficiency, energy saving, lower production cost The servo motor only rotates when the machine is started (the friction method is the continuous operation of the motor). The comprehensive energy-saving effect is about 55% energy-saving compared with the previous friction press.

    7. Stamping forming, high pressure energy The pressing method is the same as that of the conventional friction press. The flywheel energy is all consumed and pressurized. It is an instant pressing method, so the pressurizing energy generated is very high.

    8. Low noise and low vibration Pressure is produced within the framework. Compared with punch hammers, there is no excessive ground vibration, and ground foundation works can be implemented at low cost. Noise and vibration are much lower than impact hammer