|
[China]
Trade Verify
Address: Room 1309, Tower B, Jiada International, Guangyun Road, Baiyun District, Guangzhou City, Guangdong Province
Contact name:Wayne
Guangzhou Meklon Chemical Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
A Comprehensive Solution for Automotive Refinishing
MeklonCar Paint offers a comprehensive range of high-quality automotive refinishing products, designed to meet the diverse needs of professional bodyshops. Our system is built around a flexible mixing and tinting system, enabling precise color matching for various vehicle makes and models.
Key Product Categories:
Color Matching Excellence
Our system includes a vast library of color formulas for a wide range of automotive brands, including Nissan, Honda, Toyota, Ford, Chrysler, Fiat, Citroen, and many others. This ensures accurate color matching and consistent results, every time.
Benefits of MeklonCar Paint:
| Type | 1K Transparent Blue basecoat color paint | |
| Substrates | Well-sanded,completely dried and good existing finishes as: A. original paint B.old paint firm C.1K or 2K primer | |
| Surface Cleaning | Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry, again with degreaser. | |
| Mixing Ratio | Basecoat | Thinner |
| <15°C | 1K Transparent Blue basecoat color paint | 602 Fast Thinner |
| 15-30°C | 1K Transparent Blue basecoat color paint | 602 Standard Thinner |
| >30°C | 1K Transparent Blue basecoat color paint | 602 Slow Thinner |
| Spray Viscosity | 14-16s to drop off, in 4# viscosity cup at 25°C | |
| Re-Treatment | After Spray, allow 10-20 minutes air-drying time,then spray clear coat at once. | |
| Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 3-5kg/cm² Gravity Feed: 1.4-1.6mm 3-5kg/cm² | |
| Spray Technology | Coats & Thickness: 2-3 coats, total 15-20um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. | |
| Shelf Life | 2 years in original sealed can, cool and dry place at 25°C | |
| OEM/ODM | As customers' order | |
| Package Size | 1L*12 Tins or 3.75L*4 Tins | |
Note:
1. The substrate must be cleaned and sanded before spray, wet
sanding P800-1000 and then dry.
2. At ambient temperature higher than 30ºC, add appropriate
Retarder Solvent into thinner to avoid blushing. For more details,
please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic
paint film should be 15-25um.
