|
[China]
Trade Verify
Address: Room 1309, Tower B, Jiada International, Guangyun Road, Baiyun District, Guangzhou City, Guangdong Province
Contact name:Wayne
Guangzhou Meklon Chemical Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
P-218 Big Red Car Paint Top Coat Smooth Bright Effect Enhancing Texture Appearance
Product Description:
| Product Name: | P-218 Scarlet 2K | Specificatons: | 1L/4L/5L |
| Features: | Durable, anti-corrosion, anti-rust and high sun protection | Scope of application: | Cars, ships, airplanes, tanks |
| Color: | Support color correction | ||
| Drying time:: | surface drying time is 2 hours, actual drying time is 24 hours | Mixing ratio: | paint:curing agent:thinner=2:1:0.3 |
| Storage method: | Store in a cool, dry, ventilated and dark place | Sales scope: | global |
Color introduction:
Maroon car paint is a deep red hue that is similar to the color of
dates. It is weather-resistant and durable, resisting everyday
scratches, stains and UV radiation. Maroon car paint should also
have good adhesion and uniformity to ensure overall coating quality
and consistency.
After proper coating and polishing treatment, Meklon automotive
paint can give the maroon paint a smooth and bright effect,
reflecting rich light and enhancing the texture and appeal of the
appearance. Gloss can also be affected by paint maintenance,
polishing and protective coatings. Regular maintenance and upkeep
are important factors in maintaining the bright appearance and
glossiness of maroon car paint.
Product performance and construction:
| construction substrate: | A. Original paint layer; | B. Old car paint film; | C. Intermediate paint film; Note that the construction substrate needs to be carefully polished, the surface is dry and in good condition | ||
| Substrate treatment: | Before spraying the substrate, the substrate must be cleaned, degreased with degreaser, and polished with 800#~1000# sandpaper. Clean it after polishing, and use degreaser to remove oil again. | ||||
| Construction ratio: | Temperature＜15℃ MK12X quick-drying hardener agent 50 parts MK602 quick-drying thinner 15-30 parts | Temperature 15℃-30℃ P-12X standard hardener 50 parts P-602 standard diluent 15-30 parts | |||
Temperature＞30℃ 12X slow drying hardener 50 parts 602 slow drying thinner 15-30 parts | |||||
| Viscosity: | 16 seconds to 19 seconds, spray 4# viscosity cup (at normal temperature) | ||||
| Process:: | The spraying process uses wet spraying to spray 2 to 3 layers on the surface of the substrate. Pay attention to leaving 5 to 10 minutes of evaporation time between each two layers. After spraying, the paint film needs to stand for 10 to 15 minutes. Then bake. Thickness in dry film state: 35~50 microns | ||||
| Re-construction: | After spraying, any areas with particles and sags should be wet-smoothed and polished with 2000# sandpaper after they are completely hardened. | ||||
| spray tools: | Gravity spray gun (top pot) 1.2-1.5mm 3-5kg/cm2 | ||||
| Suction spray gun (bottom) 1.4-1.6mm 3-5kg/cm2 | |||||
| Use time after mixing: | After mixing the components, they need to be used within 4 hours | ||||
| Usage amount: | The thickness of a single coating is 35 microns. The paint is calculated based on a conversion rate of 70%. The theoretical value of the mixed paint spray area is: 8 square meters/liter, and the original unmixed 13 square meters/liter. | ||||
| Drying time: | ambient temperature | Non-stick time | Dry to touch time | Available assembly time | Complete drying time |
| Normal temperature 25℃ | 40 minutes | 2 hours | 9 hours | 6 days | |
| Bake at 70℃ | 5 minutes | 10 minutes | 25 minutes | 50minutes | |
| Product expiration date: | Validity period of 1-3 years, the product should be placed in a cool and dry place at 20℃ | ||||
| Product packaging specifications: | 1L×12 cans/box; 4L×4 cans/box;5Lx4 cans/box | ||||
Precautions:
1. Before spraying, the substrate must be degreased with a
degreaser, sanded and dried.
2. If the temperature of the construction environment is high, >30°C, an appropriate amount of anti-white water can be added to the diluent.
3. After mixing each component, use it up as soon as possible and do not save it for further use.
4. After spraying, the tools should be cleaned with thinner in time.
product photo:
