|
[China]
Trade Verify
Address: RM2729, TOWER 1, NANSHUN SQUARE, JIANPING ROAD, GUICHENG NANHAI, FOSHAN CHINA.
Contact name:Annie
FOSHAN SUNHOPE CO.,LTD. |
|
Verified Suppliers
|
|
|
Continuous Nitrogen Power Atmosphere Brazing for Melting Furnace For Condensed and Radiator Cores
Product introductions:
The aluminium radiator brazing furnace is used to braze aluminum heat exchangers such as radiators, intercoolers, evaporators,and heater radiator under protective nitrogen atmosphere. The flux used is NOCOLOK flux.
Aluminum brazing furnace system with controllable atmosphere is mainly used for continuous brazing of aluminum water tank, oil cooler, intercooler, warm air, tubular condenser, evaporator, parallel flow condenser, cascade evaporator, air cooler of power station under nitrogen protection atmosphere.
Production flow of continuous nitrogen brazing furance:
loading workpiece → flux spraying → drying → going through front curtain room (with nitrogen) → brazing (with nitrogen) → slag removing (nitrogen pre-heating) → going through static cooling room → going through rear curtain room (with nitrogen) → going through compulsive air cooling room → manual taking off cores from belt
Product patameters:
| Serial number | Name | Length*Width*Height | Material |
| 1 | Spray zone | 7000*1360*250mm | Spray room is 304 Stainless steel,The main frame is used low carbon steel for welding |
| 2 | External size of drying furnace | 8000*1850*2000mm | The outside frame is processed and welded from low carbon steel material
|
| 3 | Internal size of drying furnace | 8000*1050*250mm | Internal plate 304 Stainless steel,thickness 2mm |
| 4 | External size of burning furnace | 10000*2150*1900mm | The outside frame is processed and welded from low carbon steel material
|
| 5 | Internal size of burning furnace | 1000*1050*250mm | Muffle 316L stainless steel, thickness of 8mm length use the whole sheet for bending without splicing |
| 6 | External size of Air cool room | 6000*1360*1900mm | Processed and welded from low carbon steel material
|
| 7 | Mesh belt | Width 1000mm Filament diameter3.2mm | Brazing zone 316L Other parts 304 Stainless Steel |
| 8 | The total length of the equipment | 35.5m |
a) Natural gas burners and control solenoid valves are all
well-known Sinon brand in China.
b) Each burner is equipped with an independent gas valve control
system.
C) The temperature controller automatically adjusts the flame size
by air-fuel ratio to achieve uniform temperature control.
d) The drying oven adopts independent conveyor belt and stepless
variable frequency speed drive system.
e) Cleaning and maintenance openings are arranged on one side of
the furnace body.
f) The preheater is equipped with a heat exchanger for heat recovery and utilization. The heat discharged can be reclaimed twice to the drying oven for use, and the air is preheated to save energy.
About us:
Our company has been engaged in the manufacture
and development of automobile radiator condenser products for more
than 15 years. Most of the products are sold to all countries and
regions in the world, and have accumulated rich production
experience.Our company is good at manufacturing all the process of
the radiator tank production line.In recent years,many companies
from other countries in the same industry also bought the CKD from
us and purchased the machine equipment from us as well.
With the development of heat exchange industry,
more and more countries and regions are committed to building local
radiator condenser plants. With our understanding of the industry,
we have been helping foreign customers to set up radiator factories
and provide the production machine in the region in the past five
years. We provide customers with pre-sale and after-sale equipment
design and service according to the size of our products.In the
meantime we will also provide the material to our customers as
well. We will send technicians to guide the installation on site to
ensure the smooth production of the customer's factory, and provide
free consultation service in case of any doubt in the production
process.
At the same time, our company provides
customers with all kinds of radiator, condenser required hardware
and plastic components. Ensure the supply and quality of finished
products.
If you are interested in setting up a radiator
factory in your place or buying any products , please contact us
and we will provide you with the best service and best price.
FAQ:
1.What’s the style of spray of the aluminum Brazing furnace
machine?
The spray of the aluminum Brazing furnace machine can be divided
into dry electrostatic powder spray style and aqueous solution
spray style.
2.Does the aluminum Brazing furnace machine is customized or
standard size?
The aluminum Brazing furnace machine is customized by customers
according to their respective capacity requirements and product
series specifications.
3.Does the aluminum Brazing furnace machine use gas?
The aluminum Brazing furnace machine can use natural gas as a
productive energy source.
4.How to know what kinds of specifications of the aluminium brazing
furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the
core and the dimensions of the production workshop.The engineer
will give the best cost-effective solution according to the
information provided
