FOSHAN SUNHOPE CO.,LTD. |
Verified Suppliers
|
|
Spray section Drying section Brazing section Control system Four parts assemble the brazing furnace
1,Features of equipment
2,General introduction of equipment
Controlled atmosphere aluminum brazing furnace system, mainly used for aluminum radiator, oil cooler, inter-cooler, heater, tube-fin condenser,the evaporator, parallel flow condenser, laminated evaporator, power station air cooler and other aluminum work-piece products that can continuously brazed in a nitrogen atmosphere.
Controlled atmosphere aluminum furnace system includes:
Spray zone, drying zone, brazing zone, cooling zone, central centralized control cabinet group and other parts,etc.
The brazing zone includes preheating chamber, heating chamber, retarded cooling chamber and air cooling chamber, etc.
Controlled atmosphere aluminum furnace system includes a spray system, a drying furnace, a set of control atmosphere brazing furnace and a cooling system.The controlled atmosphere brazing furnace has a preheating chamber with an atmosphere curtain and behind that is the brazing area from which the product will be go through a retarded cooling chamber with an atmosphere curtain to make the work-piece weld and fix . The temperature of the work-piece from the retarded cooling chamber is about 300℃ and then the temperature of the work-piece is reduced again through the air cooling chamber to make the manual operation convenient.
Product parameter:
Brazing zone
Power supply | 380V Three phase 50HZ |
Rated power | 155.5KW |
Rated temperature | 650℃±3℃ |
Heating method | Radiant tube heating |
Width of mesh belt | 1000mm(316L Stainless Steel Braiding) |
Maximum height of workpiece | 250mm |
Mesh belt transmission speed | 200—1500mm/min(Continuously adjustable) |
Face height of mesh belt | 900mm |
Mesh belt transmission power | 2.2KW |
Temperature Control | Five sections of ten areas(Ten temperature monitor points) |
Nitrogen consumption | About 35~45m 3/h |
Heating up time |
3h(Related to the production environment) |
About us:
With the development of heat exchange
industry, more and more countries and regions are committed to
building local radiator condenser plants. With our understanding of
the industry, we have been helping foreign customers to set up
radiator factories and provide the production machine in the region
in the past five years. We provide customers with pre-sale and
after-sale equipment design and service according to the size of
our products.In the meantime we will also provide the material to
our customers as well. We will send technicians to guide the
installation on site to ensure the smooth production of the
customer's factory, and provide free consultation service in case
of any doubt in the production process.
Our company has been engaged in the
manufacture and development of automobile radiator condenser
products for more than 15 years. Most of the products are sold to
all countries and regions in the world, and have accumulated rich
production experience.Our company is good at manufacturing all the
process of the radiator tank production line.In recent years,many
companies from other countries in the same industry also bought the
CKD from us and purchased the machine equipment from us as well.
If you are interested in setting up a radiator
factory in your place or buying any products , please contact us
and we will provide you with the best service and best price.
FAQ:
1.What’s the style of spray of the aluminum Brazing furnace machine?
The spray of the aluminum Brazing furnace machine can be divided into dry electrostatic powder spray style and aqueous solution spray style.
2.Does the aluminum Brazing furnace machine is customized or standard size?
The aluminum Brazing furnace machine is customized by customers according to their respective capacity requirements and product series specifications.
3.Does the aluminum Brazing furnace machine use gas?
The aluminum Brazing furnace machine can use natural gas as a productive energy source.
4.How to know what kinds of specifications of the aluminium brazing furnace machine should be customized?
The customers provide the productions plan ,the biggest size of the core and the dimensions of the production workshop.The engineer will give the best cost-effective solution according to the information provided.