Fin 8+Tube 2mm Radiator Core Builder Machine Fin Brazing Furnace PLC Control

Fin 8+2 tube tube pitch 10 Radiator Core builder machine Core Assembly Machine Number of workpiece per assembly 1 piece

Production application:

This machine can assemble the head plate, fin, side plate, and other workpiece one-time assembly into the radiator core body.

The machine works smoothly, easy to operate, fast assembly, low energy consumption and no noise, accurate assembly size, uniform distribution, core forming neat and beautiful, easy to braze forming.

Product parameters:

1.Tube pitch is 10 (fin 8+2 tube),the tube and fin size can change accroding to customer's request

2.Number of workpiece per assembly: 1 piece

3.Core high: 300 -- 850 mm

4.Core thickness range: 16-56 mm

5.Center distance from tube to tube: 10mm (fin height: 8mm, flat tube thickness: 2mm)

Note:The comb assembly needs to be replaced due to different spacing between the tube and fin

6.Maximum size of flat tube arrangement (core width) : 850 mm (center distance of flat tube is 10mm, total 85 teeth)

7.Assembly accuracy:

Diagonal error ±1.5 mm

Core height error ±1mm

8.Power supply: single-phase 220V 50Hz 0.5kw

9.Working pressure: 0.5-0.8Mpa

Product features:

The whole equipment adopts mechanical and electrical combination, PLC control, pneumatic components with mechanical device execution structure, with manual operation (tube, tape, head plate), automatic patting, clamping, assembly and other steps to complete the core assembly.

About us:

    Our company has been engaged in the manufacture and development of automobile radiator condenser products for more than 15 years. Most of the products are sold to all countries and regions in the world, and have accumulated rich production experience.

     With the development of heat exchanger industry, more and more countries and regions are committed to building local radiator condenser plants. With our understanding of the industry, we have been helping foreign customers to set up radiator factories in the region in the past five years. We provide customers with pre-sale and after-sale equipment design and service according to the size of our products. We will send technicians to guide the installation on site to ensure the smooth production of the customer's factory, and provide free consultation service in case of any doubt in the production process. At the same time, our company provides customers with all kinds of radiator, condenser required hardware and plastic components. Ensure the supply and quality of finished products. If you are interested in setting up a radiator factory in your place, please contact us and we will provide you with the best service.

FAQ:

1.What is the maximum size of the core that can be assembled by semi automatic core building machine ?

At the moment we assembled the maximum size of core is 1200*1200mm,two rows.

2.Does it can assemble the same height of fins in the radiator core and condenser core in the same machine?

No,because it has big difference between the radiator tube and condenser tube,it can't be mixed use