Home Companies Xi'an Dehou Electronic Technology Co., Ltd.

IP67 Tuning Fork Level Transmitter SPDT High Temperature Measurement

Xi'an Dehou Electronic Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Block V5, Ronghao Industrial Town, Gaoling District, Xi'an City, Shaanxi Province

Contact name:Jero

Inquir Now

Xi'an Dehou Electronic Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

IP67 Tuning Fork Level Transmitter SPDT High Temperature Measurement

Country/Region china
City & Province Shaanxi
Categories Other Measuring & Analysing Instruments
InquireNow

Product Details

Tuning Fork Level Switch 

 

NYYCUK tuning fork level switch is a new type of level switch. It is suitable for almost all liquid media, but also for the measurement of free-flowing, medium-density solid powders or granules. Since the tuning fork level switch basically has no moving parts, the mechanical wear is relatively low, so it does not need maintenance and adjustment, and is simple and convenient to use.

In addition, the level switch adopts foreign new technology and original imported chips, which has the advantages of long service life, stable performance, safety and reliability, and strong adaptability (different electrical parameters and density of the measured medium will not affect the measurement) , No adjustment (no on-site adjustment is required no matter what medium is measured) and maintenance-free, it is widely used in the process control of material level in metallurgy, building materials, chemical industry, light industry, grain and other industries.

 

Tuning Fork Level Switch Liquid Technical Parameter

 

Typical ApplicationsCan be used with most fluids, including coating fluids, aerated fluids, and slurries
Fork body material304/316L (optional)
Fork length44mm (can be customized)
Power supply24VDC, 220VAC
Working temperatureFork body -40~+180℃ Instrument -40~+80℃
Process pressure<2.0MPa
Process connectionThread, Flange (optional)
Signal outputSPDT relay output
Protection classIP67
Explosion-proof gradeExiaⅡCT6 Ga, ExibⅡCT6 Gb

 

Tuning Fork Level Switch Installation Requirements

 

  • The instrument is generally installed vertically with the fork end downwards, horizontally or inclined downwardly with the fork end (when the material has strong adhesion, it is recommended to install it vertically with the fork end downward).
  • The instrument is not allowed to be installed upwards, that is, the installation method with the fork end upwards.
  • Vertical or inclined installation is recommended when the material is mixed with lumps or hard particles.
  • It is recommended to test the calibration sensitivity with a small sample of the medium prior to installation on the equipment. For example: immerse the meter in a medium-filled window to check the reliability of the switch.
  • The actual installation is generally divided into top installation (high-level monitoring of the medium), side wall installation (high-level or low-level monitoring of the medium), and pipeline installation (air flow monitoring of the material pump).

 

Tuning Fork Level Switch Electrical Connections

 

The wiring of NYYCUK tuning fork level switch is shown in the figure. No. 1 and No. 2 of the instrument terminal are AC220V AC power supply, No. 3 is the earth, No. 4 and No. 5 are DC24V DC power supply), No. 6, No. 7, No. 8, No. 9, No. 10, No. 11 are relay output terminals.

 

When the selection limit selection is in the L state:

 

Contacts 6, 7, 9, and 10 of the relay are normally closed, and contacts 7, 8, 10, and 11 are normally open. The red light is on, indicating that the tuning fork is in a vibrating state. When the material touches the plug, the plug stops vibrating, and the green light is on, the relay Turn over, normally open contacts 7, 8, 10, 11 are closed, and normally closed contacts 6, 7, 9, 10 are disconnected, indicating that the tuning fork is in a stopped vibration state.

 


 

Hot Products

Cast Aluminum Radar Level Transmitter Parabolic Antenna For Tank Height Measurement Radar Level ...
The radar level meter NYRD80X series sensor is a 26GHz high-frequency radar level measuring ...
26GHz NYRD-PB-B Flat Radar Level Meter The flat-panel radar level meter is a 26GHz high-frequency ...
NYRD701 Cable Type 1.8GHz Radar Level Meter Transmitter NYRD701 Cable Type 1.8GHz Radar Level Meter ...
Liquid Solid Powder Measure 80G Radar Level Meter Liquid Level Meter 80G Radar Level Meter Liquid ...
Liquid Level Meter Solid Powder Measure 80GHz Radar Level Mete FMCW Radar Products Liquid Level ...