|
[China]
Trade Verify
Address: Block V5, Ronghao Industrial Town, Gaoling District, Xi'an City, Shaanxi Province
Contact name:Gao
Xi 'an West Control Internet Of Things Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Low Price Hotsell Biogas Flow Meter Air Flow Meter Thermal Gas Mass Flow Meter
Low Price Hotsell Biogas Flow Meter Air Flow Meter Thermal Gas Mass Flow Meter Description:
The NYHGF-3000 series of thermal gas mass flow meters are instruments that measure the mass flow of gases using the principle of heat transfer. The meter's sensor consists of two reference-level thermal resistors (platinum RTD). One is the mass velocity sensor T1, and the other is the temperature sensor T2 that measures the temperature change of the gas. When the two RTDs are placed in the gas to be measured, the sensor T1 is heated to a constant temperature difference above the gas temperature, and the other sensor T2 Used to sense the temperature of the gas being measured.
Low Price Hotsell Biogas Flow Meter Air Flow Meter Thermal Gas Mass Flow Meter Parameters:
| Material | Stainless steel, Cast steel |
| Display | 4 lines LCD display |
| Accuracy | ±1% |
| Measuring range | All gases (except acetylene) |
| Diameter (MM) | DN10-100 (Flange type), DN125-1500 (Insert type) |
| Flow rate | 0.1-100Nm/s |
| Output signal | Standard:4-20mA, Option:RS485/RS232 |
| Press | 1.6Mpa, Option (2.5MPa, 4.0MPa, 6.4Mpa) |
| Power | Standard: 24VDC/1.5A, Option:220VAC |
| Conditions of use | A. ambient temperature:-20 ~+150 ℃ |
| B. medium temperature: 0 ~+200 ℃ | |
| C. relative humidity: 45-75% | |
| D. atmospheric pressure: 86 kpa-106 kpa | |
| Protection level | IP65 |
Low Price Hotsell Biogas Flow Meter Air Flow Meter Thermal Gas Mass Flow Meter Features:
Core components
High-performance intelligent microprocessor and analog-to-digital and building-to-model conversion chip
LCD screen
The measurement reading is in place in one step, and the LCD screen is displayed on the spot
Signal output
Support analog output 4~20MA, RS485 communication, pulse output,
220VAC or 24VDC power supply to realize factory automation
Flange material
The flange standard complies with the international GB/T91-2000 and is made of 304 stainless steel.
