ExdⅡB T4 Explosion Proof Electric Actuator

DCL-Ex10 Ex20 dimension and parameters.pdf

ExdⅡB T4 grade compact explosion proof electric actuator / quarter turn / IP68

Description

DCL explosion proof electric actuators are widely used in potential environment of flammable and explosive, such as petroleum, chemical, power plant, liquid gas, winery and metallurgy etc. To ensure workers are away from danger, explosion proof is a must. For different industries, zones and divisions, different explosion proof grade is required.

Actuators with ExdIIBT4 and Group C, D T4 grade can be used in 90% explosive gas atmospheres except for colliery. The maximum surface temperature of actuator is less than 135℃ and 300.6F during severe duty applications. Over 10 years of safety operations in China, now all series anti explosion actuators are on rigorous test process of CSA and will be certified in Q3 of 2020.

specification:

Features

• Quarter turn operation with mechanical limits
• Cylinder stop type connection surfaces of every housing cover, flame proof gap and length complied to UL and CSA standard
• Class 1 Zone 1 AExdIIBT4 grade and Class 1 Division 1, Group C, D T4.
• Double lip skeleton oil seal and O-ring seal to ensure protection grade to IP68.
• 10mm high strength glass lens for valve position indicator, keep strong hardness both in low temperature(-22F) and high temperature(140F).
• Hard die cast aluminum alloy enclosure to ensure actuator's resistance of high explosion pressure(＞2.2 MPa).
• Non-ventilated motor with fire treatment.
• Duty rate is 70%, S2 short time duty with continuous operation less than 15mins and S4 intermittent type operation with 1200times/hour.
• ISO5211 multi flange mounting.
• CSA certification in process per UL standard/ATEX marked

Specification: