Home Companies Shenzhen Miray Communication Technology Co., Ltd.

Cisco 10gig SFP+ Transceiver Module Low Power Consumption 1310nm SFF-8431

Active Member

Contact Us

[China]

Address: A2315, Hezheng Huiyicheng, Laodong Community, Xixiang, Baoan, Shenzhen, China

Contact name:Jenny

Shenzhen Miray Communication Technology Co., Ltd.

Cisco 10gig SFP+ Transceiver Module Low Power Consumption 1310nm SFF-8431

Country/Region	china
City & Province	shenzhen
Categories	Inverters & Converters

Product Details

SFP-10G-LR Module Cisco 10GBase-LR SFP+ SMF 1310 nm LC duplex 10km

Description

This Cisco SFP-10G-LR Compatible 10GBase-LR LC SFP Transceiver with a duplex LC female connector functions just like the Cisco® SFP-10G-LR transceiver module and is designed to operate with Cisco networking equipment. It also meets or exceeds the SFP-10G-LR's original specifications and complies with MSA standards.

This 10GBase-LR transceiver is fully hot-pluggable, so you can install it without shutting down the network or rebooting your device. It supports data transfer rates up to 10 Gbps with 1310 nm wavelength signaling. It transmits across six miles (10 kilometers) of 9/125 SMF cabling. Its metallic housing allows low EMI.

Features

Optical interface compliant to IEEE 802.3ae 10GBASE-LR
Electrical interface compliant to SFF-8431
Hot Pluggable
1310nm DFB transmitter, PIN photo-detector
Operating case temperature:
Standard: 0 to +70°C
Industrial: -40 to +85°C
Low power consumption
Applicable for 10km or 20km SMF connection
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth

Recommended Operating Environment

Parameter	Symbol	Unit	Min	Typ	Max
Operating Case Temperature Range	Tc	^oC	0		70
Power Supply Voltage	Vcc	V	3.14	3.3	3.46
Bit Rate	BR	Gb/s			10.52
Bit Error Ratio	BER				10^-12
Max Supported Link Length	L	Km			10

Optical Parameters(T_OP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameter	Symbol	Min	Typ	Max	Note	Unit
Optical Transmitter Characteristics
Nominal Wavelength	λ		1310			nm
Optical Output Power	Pav	-6		2		dBm
Extinction Ratio	ER	3.5				dB
Average Launch Power of OFF Transmitter	POFF			-35		dBm
Relative Intensity Noise	RIN			-128		dB/Hz
Optical Receiver Characteristics
Center Wavelength	λC	1260		1620		nm
Receiver Sensitivity@10.3Gb/s	RSENSE			-14.4	1	dBm
Receiver Overload		0.5				dBm
Optical Return Loss		27		-		dB
LOS Assert	LOSA	-30				dBm
LOS De-Assert LOS	LOSD			-17		dBm
LOS Hysteresis		0.5				dB