Cold Extruded Coupler Joint In Reinforcement JGJ108-96 550MPa Yield Strength

Building material connector cold extruded steel bar connector

Description of Cold Extrusion Machine System:

The system includes YJ650 machine, YJ800 machine and coupler.
The product meets the requirements of JGJ108-96.
1. A full set of YJ650: It can process steel bars with a diameter of 16mm to 32mm.
2. YJ800 complete set: It can process steel bars with a diameter of 32mm to 40mm.
3. The whole set of YJ650 and YJ800 pressure equipment can handle 16mm-40mm.

The working principle of cold extrusion machine:

      The steel bar can be connected with the lateral extrusion through a cold extruder, so that the connector is plastically deformed, and then it is tightly occluded with the steel to connect the steel bar.

advantage:

(1) The tensile strength of the steel bar joint is very strong, which can meet the requirements of domestic and foreign standards: Chinese standard (JGJ107), American standard (UBC1997), British standard (BSB110), French standard (NF25-20) -1), Germany Standard (DIN1045), ISO/WD15835 (draft);

(2) Convenient operation, no skilled operators are required;

(3) The power demand is small and is not affected by the on-site electricity consumption;

(4) Environmental protection, no need for open flame operation, and not affected by weather;