QIFU Machinery Co., Ltd |
|
D12-D50 Rebar Parallel Thread Connection Sleeve Tapered Rebar Joint
product description:
The threaded connector has a diameter of 12mm
to 40mm, and one end of the threaded connector is concave. This
threaded threaded connector belongs to the Up forged parallel
threaded connection system. It is different from our Stendra type
connector. One end of the threaded connector is concave, which can
meet the requirements of different projects.
specification:
1. Rebar diameter: 12-50mm
2. Material: 45# carbon steel
3. Pitch: 1.75 / 2.5 / 3.0 / 4.0mm
4. Standard: Middle East, Britain, South Korea, others according to
customer requirements.
5. Higher tensile strength, lower cost
Warranty range: | 3 years |
Model: | Rebar Joint |
Connection method: | screw connection |
Delivery time: | 15 days -30 days |
Packing method: | pallet or according to customer requirements |
Part Type: | Rebar Joint |
Material: | 20#, 45# |
Specification: | diameter 12mm-50mm |
working principle:
First, use the GD-150 set forging machine to enlarge the end of the
steel bar.
Then, use the GZL-45 tapping machine to machine the screws on the
enlarged end.
Third, use a rebar connector to connect the two rebar ends.