M38 Coupler For Steel Reinforcement 45# Steel Parallel Threaded Connector

M38 steel bar connector steel bar connection 45# steel parallel threaded connector

roduct description:

      Rebar sleeve is also called rebar joint: a connector used to connect rebar, and its internal thread corresponds to the thread of the thread. The construction process is simple: the ends of the steel bars are processed into straight threads by rolling, and the two steel bars are connected to each other with the corresponding connecting sleeve.

Features of steel bar joints:

      Rebar stripping and rolling straight thread connection is a new type of steel connection sleeve technology. The structural principle is to strip off a part of the longitudinal ribs and transverse ribs at both ends of the steel bars to be connected, and then directly roll them into ordinary straight bars. After threading, it is connected with a special straight threaded steel connecting sleeve. Form a steel connection.

Application of steel sleeve:

1. The use of steel connecting sleeves in the construction engineering industry can greatly reduce the use of materials, and the operation is simple, and it is not limited by the type of steel components.
2. The straight threaded sleeve connection is convenient, fast and simple, construction does not require electricity, weatherproof, and can be constructed all-weather.
3. It can connect horizontal, vertical and inclined HRB335, HRB400 steel bars with the same or different diameters.
4. Good anti-low temperature effect, passing the low temperature test of minus 40 degrees.