Programmable Corrosion Testing Machine , Fog Cyclic Salt Spray Corrosion Test Chamber

Programmable Corrosion Testing Machine , Fog Cyclic Salt Spray Corrosion Test Chamber

Product description:

Corrosion Testing Machine  Corrosion Testing (e.g. Salt Spray) is an environmental simulation that helps you estimate component service life, compare candidate materials for use with your parts in your environment, and help screen suitable materials for your application.

Application Industry:

1. Electronic products: mobile phones, computers, television, video recorders and so on
2. Textile fabric products: clothes, hats, shoes, ropes
3. Wire and cable: data cable, usb,
4. Leather products: handbags, wallets, leather shoes, leather chairs
5. Instrumentation, vehicles, plastic products, metal,
6. Food, chemical, building materials, medical, aerospace
7. Others

Materials used:

1. Test chamber: use the PVC gray impact resistance plate, 5mm in thickness;

2. Thermostat water tank: use the PVC gray impact resistance plate, 5mm in thickness and it is equipped with the auto water  level controller to avoid the inconvenience to refill the water by manpower.

3. The upper cover of the test chamber: use the transparent acrylic plate, 5mm in thickness;

4. The barrel for refilling the reagent: equipped with a built in water level gauge. Use the PVC gray impact resistance plate  made,mm in thickness, which looks as an integral whole with the machine stand.

5. The basket supporter inside the test chamber: use the PVC gray impact resistance plate, the test angle can be  freely  adjusted to 15º C and 30º C.

     1.48 test pieces can be placed by the angle of 15 degree

     2.30 test pieces can be placed by the angle of 30 degree

     Note: the size of the test pieces is 150×70mm(H×D)

6. The saturated air tank: made of stainless steel, 2mm in thickness and equipped with the auto water level       controller to avoid the inconvenience to refill the water by manpower.

Application Temperature:

Set the type according to the standards of CNS, JIS and ASTM:

1. The test method of salt water: The test chamber: 35°C±1°C/ The saturated air barrel: 47°C±1°C

2. The test method of corrosive resistant

The test chamber: 50°C±1°C/ The saturated air barrel: 63°C±1°C

Experimental space volume: 60L/90L/120L/160L/800L (can be customized)

 
Design standard:
 
CNS:3627,3385,4159,7669,8886；JIS:D0201,H8502,H8610,K5400,Z2371;
ISO: 3768,3769,3770;
ASTM: B117,B268.
 

Standard Parameters:

salt spray test machine, salt spray test chamber