|
[China]
Trade Verify
Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China
Contact name:Kelly
Dongguan Haida Equipment Co.,LTD |
|
Verified Suppliers
|
|
|
Abrasion Resistance DIN Abrasion Tester , Rubber Testing Machine
Brief introduction
1. Product description:
The DIN Abrasion Tester is used to test abrasion resistance of elastic material, rubber, tire, conveyor belt, solo, soft synthetic leather and other materials.
Abrasion Tester for elastic materials, rubber, tires, conveyor belts, soles, soft synthetic leather, leather. The And other material quality of the wear measurement.
2. Principle
Under specified touched pressure and given area, when the sample and the abrasive paper get an angle, test
the abrasion resistance of the sample on the abrasive paper with certain rank.
Wrap the abrasive paper on the roller. The sample adpress on the roller with abrasive paper to make the sample
move horizontally along with the roller. Abrasion is produced on the one end of the cylinder sample. Measure the
loss value of the sample and calculate the abrasion resistance according to sample density.
3. Design criteria
The instrument reference standard: DIN-53516﹑ISO/DIS-4649﹑BS903 PART9 and GB-9867.
4. Main technical parameters
Sample load | 2.5N ±0.2N / 5 N ±0.2N |
Roller wheel diameter | Φ(150 ±0.2)mm |
Roller wheel length | 460mm |
Roller wheel revolving speed | 40±1r.p.m |
Abrasion stroke | 40m equal to roller wheel turns number 84 |
Abrasion speed | 0.32m/sec |
Dip angle | 3°(included angle between sample clamp holder and vertical plane of roller wheel) |
Volume (approx.) | 70cm ×30cm ×30cm |
Weight (approx.) | 50kg |
Power | 1∮ AC 220V 3A(specified) |
|
Right side of the product |
Product front
