Active Member
|
[China]
Address: Kangcun Industrial Zone, Xinxiang City, Henan Province, China
Contact name:Alina
Xinxiang HUAYIN Renewable Energy Equipment Co., Ltd |
|
|
Waste Engine Oil Pyrolysis Oil Distillation Plant To Diesel
The waste oil distillation machine with high vacuum molecular distillation technology, it can convert waste pyrolysis oil ,waste engine oil into diesel , with features of low cost, high recovery rate, environmental friendly and energy-saving.
Specification
Item | Contents | |
| Input-Raw Materials | Waste engine/motor oil/Lubrication oil | |
| Average out-put oil rate | 85%-90% | |
| By-products | Diesel oil, waste gas, slag | |
| Structure form | Horizontal | |
| Operating pressure | Constant pressure | |
| Heating material | Coal, charcoal, fuel gas, fuel oil | |
| Model(Diameter*Length)(mm) | Reactor size | Capacity |
| D1500*L3000 | 3 Ton/Day | |
| D2000*L5000 | 5 Ton/Day | |
| D2800*L6000 | 10 Ton/Day | |
| Material of reactor | Q245R&Q345R boiler plate | |
| Thickness of reactor | 16mm, 18mm | |
| Mode of cooling | Circulating water cooling | |
| Space needed | Length: 30m, Width :10 m at most | |
| Power consumption | Average 15 KW/h | |
3D flow chart
Working process of the waste engine oil /pyrolysis oil distillation plant
1. Pump waste oil into distillation reactor by oil pump.
2. Heat the reactor, and the liquid oil will slowly become oil gas, oil gas will go through catalytic chamber and condenser, then diesel will be cooled out first by controlling the temperature over 150 Celsius degrees.
3.The gasoline will be cooled out when the temperature is below 150 Celsius degrees, the rest of the system is same as pyrolysis system.
with catalyst the oil color is same with the beer color, close to the standard diesel. can directly used in into generator power engine , heavy constrcution engine .
Detail Images
Output product
Our services
1.Engineers with over ten years’ waste to oil recycling experience will be dispatched to your place to provide technical service in guiding plant installation, plant commissioning as well as worker training.
2. After plant installation finishes, our engineers are required to help you run the plant for at least 15 batches, enabling your workers to master all the operating skills needed and then operate the plant on their own.
