|
[China]
Trade Verify
Address: 688 Xuxiang,Binhu District,Wuxi City,Jiangsu
Contact name:Eric Liu
Wuxi Wellful Decoration Materials Co.,Ltd. |
|
Verified Suppliers
|
|
|
| Performance | Result |
| Size stability | Good |
| Overall Thickness | 3.0mm/2mm/1.8mm |
| Piece per box | 36pcs |
| Peeling stength of layers | Pass |
| Shear forces of layers | Good |
| Residual indentation after static load | 0.01mm |
| Color fastness to light | ≥6 |
| Fire resistance | Bf1 |
| Slip resistance | R9 |
1.Bottom layer workshop: production of PVC floor substrate (main ingredients: PVC, stone powder)
2.Hot pressing workshop: the wear-resistant layer, color film, middle layer,bottom layers are pressed into semi-finished products.
3.Color film workshop: cutting color film and wear-resistant layer into required sizes.
4.Press workshop: PVC floor will be cut into fixed specifications, and packaging.
5.Water cooling and UV coating :release the expansion f the vinyl flooring to make sure size stability and surface wear resistant.
6.Cutting the floor into different sizes:the most popular size:
For plank it is 6''X36'',7''X48'',9''X48''
For tile it is:600mmX600mm,18''X18''
7.Trimming or slotting if needed:
Trimming makes the floor edge smooth,better for installation.
Slotting makes interlock on the edge of the floor,it is automatic operation,improve the efficiency and quality.
8.Quality inspection:Actually,this step is undergoing during basic material workshop,hot pressing workshop,cutting workshop,etc.
9.Packing:normally it is 24pcs for 18''x18'',36pcs for 6''x36'',if you have any requirements,please let us know.
| Performance | Standard |
| Shrinkage(Length change rate) | Within 0.25％,(80 centi degree,Keep 6h,Take out and check after 1 hour at least |
| Curl up | Within 0.5mm ,80centi degree,keep 6h,Take out and check after 1 hour at least |
| Wear abrasion | Below 0.015g(cs－7abrasion wheel,weight on noth side 500g,rotary 1000Rev. |
| Back retention | 20minabove(120centi degree,4h,take out after 1h) |
| Strength | 1.5kgf/cm,Universal tensile testing machine,300mm/min,Max. value |
| Softness | Middle material 56-58,basic material58-60,4kg weights on the tester,read the max. Value. |
| Weight | 3.0mm,5100g±10%,2.0mm,3800g±10%, |
| Frozen | ＜0.5mm,Average value of four corner warpage of freezing |
1.Waterproof and antiskid,
2.Super wear resistance,
3.Light weight,
4.Convenient construction,
5.Good flexibility,
6.Good thermal conductivity,
7.Easy maintenance,
8.Environmental protection,
9.Fire retardant,
10.Acid and alkali resistance
You are welcomed to contact us through email.
sales@wellful-vinyl.com
Whatsapp:+86-13057223323
Wechat:+86-13057223323
