Home Companies Hefei Supseals International Trade Co., Ltd.

John Crane 4610 Cartridge Mechanical Seal 81665460 SIC/SIC/V/PTFE 40mm

Contact Us

[China]

Trade Verify

Address: Dahuaguoji B515, Jingkai District

Contact name:Davis

Hefei Supseals International Trade Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

John Crane 4610 Cartridge Mechanical Seal 81665460 SIC/SIC/V/PTFE 40mm

Country/Region	china
Categories	Other General Mechanical Components

Product Details

John Crane 4610 Single Cartridge Mechanical Seal For Goulds Pumps, Sulzer Ensival Moret Pumps And Deepblue Pump

Operations Conditions:

Temperature: -30℃-205℃
Speed: ≦20M/S
Pressure: ≦1.5Mpa
Size: 24mm-140mm/1"-5.625"

Materials:

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded
Rotary Ring:Q5,Resin Impregnated Carbon Graphite(Furan),Silicon Carbide Reaction Bonded
Secondary Seal:Fluorocarbon Rubber(FKM),Nitrile(NBR),Ethylene Propylene(EPDM)
Spring and Metal Parts:Stainless Steel
Seat Types:
Applications:Clean Water

Performance Capabilities:

Temperature	-30℃ to 200℃, dependent on the elastomer
Pressure	Up to 10 bar
Speed	Up to 15 m/s
End play/axial float allowance	±0.1mm
Size	24mm-140mm/1"-5.625"
Brand	JR
Face	Carbon, SiC, TC
Seat	Ceramic, SiC, TC
Elastomer	NBR, EPDM, FKM etc.
Spring	SS304, SS316
Metal parts	SS304, SS316
Idividual Packing	Using foam and plastic paper wrapped, then put one piece of seal in one box,finally put in standard export carton.

The 4600 Series uses proven cartridge seal technology to minimize leakage, reduce equipment downtime, and simplify maintenance. These pre-engineered seals fit major pump standards and rotate shaft applications.
The non-clogging 4610 single cartridge seal combines affordability and dependable sealing. This innovative mechanical seal was developed to meet critical industry standards and facilitate its use in rotating shaft equipment including ANSI/DIN pumps, close-coupled pumps, and vertical pumps. The 4620P pressurized dual cartridge seal optimizes lubrication and wear prevention for increased reliability.
FEATURES AND BENEFITS
Optimized seal face designs modeled with computer simulations.
Premium carbon and silicon carbide materials.
Robust pin drive for positive torque transmission.
Optimized performance from hydraulic balance.
Non-clogging wave spring.
Centralizing ring replaces setting clips and prevents over-compression of seals during fitting.
Compact cartridge and accurate gland plate designs.
Axially and radially set seals.
Optimal flow and seal chamber venting due to large connection drilling (horizontal and vertical applications).
APPLICATIONS
ANSI/DIN process pumps.
Close-couple and vertical pumps.
Mixers and agitators.
Rotating shaft equipment.
PERFORMANCE
Temperature limits up to 400°F (205°C).
Speed limits up to 3600 rpm.
Pressure limits up to 220 psi(g) (15 bar(g)).

We are engaged in manufacture and installation exporting and wholesaling quality range of Industrial Seal, Single Spring Seal, Balance and Unbalance Spring Seal, External Mounted Seal, PTFE Bellow External Mounted Seal, Catridge Balance Seal, Multiple Spring Balance Seal, Dry Running Reverse Balance Seal, Agitator Double Acting Unbalance Seal, Single Conical Helical Spring, Rubber Bellow Seal, Multi Spring Seal, Metal Bellow Seal, Elastomer Bellow Seal, Conical Spring Seal, Air Condition Compressor Seal, Auto Cooling Seal, Metallic Bellow Seal,

All ranges of mechanical seals for Flygt Pumps, Grundfos Pumps, Pumps, APV Pumps, Grindes Pumps, Fristam, ABS, Alleeiler, EMU, GEA

Tunchenhagen, Godwin, Hidrostal, Hilge, Johnson, Lowara, Waukesha, Vogelsang Pumps etc.

At the meantime, we could manufacture seals according to your sample or drawing, and design as your request

Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.

Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.

Question 3: Where is your factory located? How can I visit there?
Answer: Our factory is located in Ningbo, China. You can fly to Ningbo or Shanghai airport directly. All our clients, from home or abroad, are warmly welcome to visit us!

Question 4: How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 authentication.

Question 5: How about the lead time?
Answer: Within10-20 days after getting the prepayment.

Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T at sight for large amount of the order.

Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.

Question 8: If I can buy pumps or pump parts from your company?
Answer: Yes , we also provide pumps and pump parts, such as Lobe pumps, Compound & homogeneous pumps, Homogeneous & emulsification pumps and so on