Home Companies Botou Xinchen Environmental Protection Equipment Co., Ltd.

Big Powder Pulse Industry ISO Bag Filter Dust Collector Machine

Active Member

Contact Us

[China]

Address: Fuzhen Industrial Development Zone, Botou City, Hebei Province

Contact name:Manager liu

Botou Xinchen Environmental Protection Equipment Co., Ltd.

Big Powder Pulse Industry ISO Bag Filter Dust Collector Machine

Country/Region	china
City & Province	hebei

Product Details

New arrival bag filter dust collector machine big powder pulse industry dust filter collector

Introduction of Pulse Dust Collector

The pulse bag dust collector is composed of ash hopper, upper box body, middle box body, lower box body, etc. The upper, middle and lower boxes are of sub-chamber structure. When working, the dust-containing gas enters the ash hopper through the air inlet, and the coarse dust particles directly fall into the bottom of the ash hopper. The gas enters the upper box body to the clean gas collection pipe-exhaust duct, and is exhausted to the atmosphere through the exhaust fan. The cleaning process is to first cut off the clean air outlet air duct of the room, so that the cloth bag of the room is in a state where there is no air flow (the divided room stops the air to remove the ash). Then open the pulse valve and use compressed air for pulse blowing and cleaning. The closing time of the shut-off valve is sufficient to ensure that the dust peeled off from the filter bag settles into the hopper after blowing, avoiding the dust from being attached to the airflow after leaving the surface of the filter bag The phenomenon of reaching the surface of the adjacent filter bag makes the filter bag clean completely, and the exhaust valve, pulse valve and ash unloading valve are fully automatically controlled by the programmable controller.

PARAMETER

Model specification	Filtration area m²	Dust concentration g/m³	Filtering wind speed	Filtration air volume	Effectiveness %	Resistance (pa)	Dimensions
HZ-24	18	<15	43500	2160-4320	99.5	120-150	109016783667
HZ-36	27	<15	43500	3240-6480	99.5	120-150	149016783667
HZ-48	36	<15	43500	4320-6480	99.5	120-150	189016783667
HZ-60	45	<15	43500	5400-10800	99.5	120-150	229016783667
HZ-80	63	<15	43500	7560-15120	99.5	120-150	309016783667
HZ-96	72	<15	43500	8650-17280	99.5	120-150	369016783667
HZ-120	99	<15	43500	10800-21890	99.5	120-150	389017003667

Characteristics of pulse bag filter
1. Pulse bag dust collector [1] Adopting split-room air-stop pulse jet ash cleaning technology, which overcomes the shortcomings of conventional pulse dust collectors and split-chamber back-blowing dust collectors. It has strong dust removal ability, high dust removal efficiency, low emission concentration and air leakage rate. Small, low energy consumption, low steel consumption, less floor space, stable and reliable operation, and good economic benefits. It is suitable for the purification of dusty gases and the recovery of materials in metallurgy, building materials, cement, machinery, chemical, electric power, and light industry industries.

2. Due to the use of divided-chamber air-stop pulse jet ash cleaning, the purpose of complete ash cleaning can be achieved with one injection, so the ash cleaning cycle is prolonged, the ash cleaning energy consumption is reduced, and the compressed air consumption can be greatly reduced. At the same time, the fatigue degree of the filter bag and the pulse valve is correspondingly reduced, which doubles the life of the filter bag and the valve disc.

3. The maintenance and replacement of bags can be carried out in separate rooms under the condition of non-stop system fan and normal system operation. The filter bag mouth adopts elastic expansion ring, which has good sealing performance, firmness and reliability. The filter bag keel adopts a polygonal shape, which reduces the friction between the bag and the keel, extends the life of the bag, and is easy to unload the bag.

4. The upper bag extraction method is adopted. After the skeleton is drawn out when changing the bag, the dirty bag is put into the ash hopper at the lower part of the box and taken out from the manhole, which improves the operating conditions of bag changing.

5. The box body adopts airtight design with good sealing performance. The inspection door uses excellent sealing materials. During the production process, kerosene is used to detect leaks, and the air leakage rate is very low.

6. The inlet and outlet air ducts are arranged compactly, and the air flow resistance is small.