Home Companies Botou Xinchen Environmental Protection Equipment Co., Ltd.

Metal Polishing 90m2 Flue Gas Desulfurization FGD Equipment

Active Member

Contact Us

[China]

Address: Fuzhen Industrial Development Zone, Botou City, Hebei Province

Contact name:Manager liu

Botou Xinchen Environmental Protection Equipment Co., Ltd.

Metal Polishing 90m2 Flue Gas Desulfurization FGD Equipment

Country/Region	china
City & Province	hebei
Categories	Gas Disposal

Product Details

90m2 Flue Gas Desulfurization Equipment For Metal Polishing

Features

1. Simple process, low cost, low running cost, easy installation.

2. Wide application range, high purification efficiency, low equipment resistance, small footprint

3. Long service life, convenient maintenance, simple operation and management, no special technical requirements.

4. According to different waste gases with different agents, the wet process is adopted to purify a variety of toxic and harmful waste gases

5. The desulfurization effect is good, and it is suitable to deal with all kinds of dust gas

Techinal parameters

Model	filting area(m2)	air volume(m3/h)	filting airspeed(m/min)	working resistance(Pa)	dust removing pressure(Mpa)
DMC-32	30	2880-4800	1.5-2.5	800-1800	0.4-0.6
DMC-48	48	4320-7200	1.5-2.5	800-1800	0.4-0.6
DMC-60	60	5400-9000	1.5-2.5	800-1800	0.4-0.6
DMC-72	72	6480-10800	1.5-2.5	800-1800	0.4-0.6
DMC-90	90	8100-13500	1.5-2.5	800-1800	0.4-0.6
DMC-120	120	10800-18000	1.5-2.5	800-1800	0.4-0.6
DMC-150	150	13000-22500	1.5-2.5	800-1800	0.4-0.6
DMC-180	180	16200-27000	1.5-2.5	800-1800	0.4-0.6
DMC-210	210	18900-31500	1.5-2.5	800-1800	0.4-0.6
DMC-250	250	22500-37500	1.5-2.5	800-1800	0.4-0.6
DMC-270	270	24300-40500	1.5-2.5	800-1800	0.4-0.6
DMC-300	300	27000-45000	1.5-2.5	800-1800	0.4-0.6
DMC-340	340	30400-51000	1.5-2.5	800-1800	0.4-0.6
DMC-420	420	37800-63000	1.5-2.5	800-1800	0.4-0.6
DMC-500	500	45000-75000	1.5-2.5	800-1800	0.4-0.6
DMC-600	600	54000-90000	1.5-2.5	800-1800	0.4-0.6
DMC-740	740	66600-111000	1.5-2.5	800-1800	0.4-0.6
DMC-870	870	78300-130500	1.5-2.5	800-1800	0.4-0.6
DMC-1000	1000	90000-150000	1.5-2.5	800-1800	0.4-0.6
DMC-1100	1100	99000-165000	1.5-2.5	800-1800	0.4-0.6

Structure Composition

The customized dust catcher are composed by the filter chamber housing, clean air chamber enclosure, filter bag, filter cage, pulse injection device, ash hopper, screw conveyor and discharger, etc. At the end, it needs centrifugal fan for power system. In another type of dust catcher, the dedusting job can be done by every chamber isolation. The every chamber of the pulse and soot cleaning cycle by soot cleaning program controller.

Equipment advantages

The DMC bag-type pulse dust collector in this project adopts the national JB/T8532-2008 standard design, and its performance characteristics are as follows:
The DMC bag-type pulse dust collector adopts a right-angle pulse valve for single-row jet cleaning and has a strong cleaning ability; Expanded ring filter bag mouth design, good sealing effect, convenient assembly and disassembly;
High-quality steel wire, multi-point welding automatic production line, galvanized protection treatment process, the filter bag frame produced has high strength and rigidity, without welding burrs, which reduces the mechanical wear of the filter bag and prolongs its service life;
The installation and maintenance mode of the uncovered cover, the filter bag replacement is quick and convenient;
DMC pulse bag filter adopts PLC or special program controller to control pulse dust removal, which is reliable in operation and high in automation.

Pictures