Active Member
|
[China]
Address: Room 1402,Ziwei Building,Haizhou Street, Haining City,Jiaxing City,Zhejiang China.
Contact name:Gary Xu
Haining Idol Imp. & Exp. Co., Ltd. |
|
|
Ladies' zip through chocolate pleather jacket with embroidery and metal ingot TW84949
Description
Shell fabric
| 100%PU/Polyurethane with 100%viscose base, 310-330gsm |
Lining
| DTM 210T |
Trims list
Trim | Position | Quantity | Size | Color |
Metal zip
| CF, side pkts | 3 | #5 | antique brass |
Branded puller
| CF, side pkts | 3 | antique brass | |
Branded popper
| cuff | 2 | antique brass | |
Branded ingot
| back neck | 1 | antique brass | |
Embroidery
| LSW front above the hem | 1 | DTM thread |
Embroidery
Styling Details:
Front:
- To have 3cm wide mandarin collar
- #5 antique brass metal zip from bottom to top, exposed DTM zip
tape with branded puller.
- Front cutlines on each side of CF zip, double panels with edge
topstitching
- Yoke cutline on front shoulder with twin needle stitching and
embroidery on shoulder, design as image
- Front has slanted functional pockets with sankofa zip pullers in
antique brass
- To have laid on 4cm waistband with edge stitching, to have
branded embroidery on the LSW front hem.
Sleeves:
- To have front and back vertical cutline and edge stitching and
without stitching under armhole seam.
- Sleeve has cuff with branded popper in antique brass
- Split sleeve with top stitching on all sleeve cutlines
- 4cm Laid on cuff and edge stitching on top and bottom.
- To have horizontal cutline and open seam stitching 20cm above the cuff.
Back:
- To have square ingot on the outside of back neck above the shell fabric patch. The patch 1cm bigger than the ingot.
- Cutlines as image, back yoke to have embroidery
- To have center back cutline and open seam.
- To have cutline and edge stitching either side of back center as image.
Inside:
To be fully lined DTM 210T lining.
Hanger loop with shell fabric.
Branding:
Ginger Mary branded trims
All metal hardware to be branded and antique brass color.
Measurement
| MEASUREMENTS | Tolerances | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 |
| Collar Depth @ Centreback Neck | 0/0 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Across Back Neck (HSP to HSP) | 5/5 | 15.8 | 15.8 | 16.2 | 16.6 | 17 | 17.6 | 18.2 | 18.8 | 19.4 | 20 |
| Across Front Mid-Armhole or Yoke | 5/5 | 30 | 31 | 32 | 33 | 34 | 35.2 | 36.4 | 37.9 | 39.4 | 40.9 |
| Across Back Mid-Armhole or Yoke | 5/5 | 34 | 35 | 36 | 37 | 38 | 39.2 | 40.4 | 41.9 | 43.4 | 44.9 |
| Half Bust at Underarm | 5/5 | 40 | 42 | 44 | 46 | 48 | 50.5 | 53 | 56 | 59 | 62 |
| Half Waist (41cm down) | 5/5 | 32 | 34 | 36 | 38 | 40 | 42.5 | 45 | 48 | 51 | 54 |
| Half Hem Width - Straight Across | 5/5 | 41 | 43 | 45 | 47 | 49 | 51.5 | 54 | 57 | 60 | 63 |
| Shoulder Seam ex Neck Trim | 5/5 | 11.1 | 11.1 | 11.4 | 11.7 | 12 | 12.3 | 12.6 | 12.9 | 13.2 | 13.5 |
| Long Sleeve Length (including Cuff) | 5/5 | 60.8 | 60.8 | 61.2 | 61.6 | 62 | 62.4 | 62.8 | 63.2 | 63.6 | 64 |
| Half Armhole (Diagonal) | 5/5 | 18.6 | 18.6 | 19.4 | 20.2 | 21 | 21.8 | 22.6 | 23.4 | 24.2 | 25 |
| Half Bicep at Underarm Pt | 5/5 | 14.6 | 14.6 | 15.4 | 16.2 | 17 | 17.8 | 18.6 | 19.4 | 20.2 | 21 |
| Half Cuff Width (Long) | 0/0 | 10 | 10.5 | 11 | 11.5 | 12 | 12.5 | 13 | 13.5 | 14 | 14.5 |
| Front Length (from HSP) | 10/10 | 59 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 |
| C/Back Length from Neck Seam | 10/10 | 57 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 |
| Cuff height | 0/0 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
Specification
