Active Member
|
[China]
Address: Room 1402,Ziwei Building,Haizhou Street, Haining City,Jiaxing City,Zhejiang China.
Contact name:Gary Xu
Haining Idol Imp. & Exp. Co., Ltd. |
|
|
Ladies' zip through ink pleather biker jacket with decorative binding insertion TW77398
Description
Shell fabric
| 100%PU/Polyurethane with 100%viscose base, 310-330gsm |
Lining
| DTM 210T |
Trims list
| Trim | Position | quantity | Size | Color |
Metal zip
| CF, side pocket, chest pocket | 5 | #5 | gunmetal |
branded Puller
| CF, side pocket, chest pocket | 5 | gunmetal | |
branded Popper
| cuff, collar | 3 | 1.7cm | gunmetal |
Styling Details:
Front:
- To have mandarin collar with edge stitching at top and bottom.
- CF zip detail with twin needle stitching, exposed zip to be #5 polished gunmetal and DTM zip tape with branded puller.
- Top of shoulder have the cutline without stitching.
- To have the cutline from shoulder seam to hem with twin needle
stitching.
- To have princess seams and twin needle stitching.
- To have 3mm self binding between side seam panels and princess seams. The distance from the binding is 2cm.
- Waistband to be 8cm wide with twin needle stitching at top of waistband.
- To have functional vertical side pocket with #5 polished gunmetal zip and branded puller, pocket with edge stitching.
- To have DANIEL HECHTER ingot at LSW waistband, to be 4cm from
side seam and 5cm from top of waistband.
Sleeves:
- Armhole to be footstitching.
- With vertical cutline at front and bck with foot stitching.
- To have cutline without stitching under armhole.
- To have 13cm wide cuff and twin needle stitching at top and 2cm
edge stitching at bottom.
- To have 3mm self binding on the top of cuff, the binding and
distance same as on the side panels.
Back:
- To have center back opening seams and either side foot stitching.
- To have curved panels and princes seams with twin needle stitching.
- To have 3mm wide self binding inserted into back side panels which same as on front.
- To have 9cm wide waistband on side as per image.
Inside:
To be fully lined DTM 210T lining.
Hanger loop with shell fabric.
Branding:
Daniel Hechter branded trims
All metal hardware to be branded and polished gunmetal color.
Spec
| MEASUREMENTS | Tolerances | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 |
| Collar Depth at C/Back Neck | 0/0 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Across Back Neck (HSP to HSP) | 5/5 | 16.8 | 17.2 | 17.6 | 18 | 18.6 | 19.2 | 19.8 | 20.4 | 21 |
| Across Back Mid-Armhole | 10/10 | 35 | 36 | 37 | 38 | 39.2 | 40.4 | 42.4 | 44.9 | 47.4 |
| Across Front Mid-Armhole or Yoke | 10/10 | 33 | 34 | 35 | 36 | 37.2 | 38.4 | 40.4 | 42.9 | 45.4 |
| Half Bust at Underarm | 10/10 | 42 | 44 | 46 | 48 | 50.5 | 53 | 56.5 | 61 | 66 |
| Half Waist (41cm down) | 10/10 | 35 | 37 | 39 | 41 | 43.5 | 46 | 49.5 | 54 | 59 |
| Half Hem Width - Straight Across | 10/10 | 43 | 45 | 47 | 49 | 51.5 | 54 | 57.5 | 62 | 67 |
| Shoulder Seam | 5/5 | 11.1 | 11.4 | 11.7 | 12 | 12.3 | 12.6 | 12.9 | 13.4 | 13.9 |
| Long Sleeve Length (including Cuff) | 5/5 | 60.8 | 61.2 | 61.6 | 62 | 62.6 | 63.2 | 63.8 | 63.8 | 63.8 |
| Half Armhole (Diagonal) | 5/5 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25.4 | 26.8 |
| Half Bicep at Underarm | 5/5 | 14.5 | 15.5 | 16.5 | 17.5 | 18.5 | 19.5 | 20.5 | 21.9 | 23.3 |
| Half Cuff Width (Long) | 5/5 | 11.5 | 12 | 12 | 12.5 | 13 | 13 | 13.5 | 14 | 14 |
| Cuff Depth | 0/0 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 |
| Front Length from HSP | 10/10 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 66 | 68 |
| C/Back Length from Neck Seam | 10/10 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64.5 |
| Neck Drop (seam to seam) | 5/5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 8.1 | 8.7 | 9.3 |
| Zip Pocket Opening | 5/5 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 15 |
Specification
