Home Companies Shenzhen Hwalon Electronic Co., Ltd.

Customized Size NTC Probe Temperature Sensor Radial Resin Coated High Stability

Shenzhen Hwalon Electronic Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Area 3, block B, huafeng huayuan science&technology innovation park, bao'an district, shenzhen, guangdong, china

Contact name:Skyfu

Inquir Now

Shenzhen Hwalon Electronic Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Customized Size NTC Probe Temperature Sensor Radial Resin Coated High Stability

Country/Region china
City & Province shenzhen guangdong
Categories Seals
InquireNow

Product Details

 

MF52 Epoxy coated blackhead customized size high precision and stability -40 ~125 degree temperature range

 

 

Features

· Radial resin coated
· Fast response
· Large material constant (B value)
· Low residue resistance
· Long life, high reliability
· Complete part, wide operation range
· Operating temperature -55°C~125°C

 

 

Packing & Delivery

1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods, for Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time: 3-5 days for samples; 7-10 days for batch goods.

 

 

 

Mechanical characteristics

1. Resistance to soldering heat

The terminals shall be dipped in to a soldering bath having a temperature of 260 ±5℃ to a point 2.0 mm from the body and then be held there for 5 ±1s, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.

 

2. Solderability

After dipping the terminal to a depth in a soldering bath of 235 ±5℃ for 2 ±0.5s .Approximately 90% of terminals should be covered with solder uniformly.

 

3. Free fall

After three times fall to a maple board from 0.75 m high, there shall be no visible damage and the change ratio of the rated zero-power resistance shall be within ±0.2% of the initial value.

 

4. Robustness of terminations

After 1N loading weight for 10 ±1s was applied to the wire terminations, there shall be no visible damage and the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.

 

Features

1. Glass-sealed, solid structure, good heat resistance, applicable for poor working environment
2. High precision in both resistance and B value, good reliability and working stability
3. Rapid respond, high sensitivity; Good consistency and interchangeability
4. High cost performance, economical and practical
5. Small size, lightweight, applicable for automation and mass production

 

 

Specifications

Rated zero-power resistanceR25 : 10 kΩ ±1% (at 25℃)
B valueB25/85: 3,950K ±1 %
Dissipation factorApprox. 0.9 mW/℃(in air)
Thermal time constantApprox. 3.0 s (in air)
Maximum power rating3.5 mW (at 25℃)
Category temperature range-30 ~ 120 ℃

 

 

Application:

1. Air-condition Equipment

2. Heating Apparatus

3. Electric Thermometer

4. Liquid Level Sensor

5. Automotive electronics

6. Electronic calendar

7. Battery of Mobile Telephone

 

 

 

 

 

 

 

Hot Products

220v ceramic heater plates or ptc heating plate for wax heater Quick Details: R25 Value 1-5000ohms ...
Features: 1. With characteristics of constant temperature 2. PTC heater does not require temperature ...
220v -240v ceramic heater ptc mosquito repellent heater ceramic ptc heater Characteristics: 1. ...
12v ceramic ptc heater or heater element 220v 240v for egg incubator Description: The PTC heater ...
Basic Introduction: Experience in Making 8 years Material Aluminum Size Customized sizes are ...
Product Name: PTC heater with insulation film 110-240V for Wax heater, Depilatory heater Features: · ...