Active Member
|
[China]
Address: 1608 Room, No.2 Building, Zhongnan Huanlehui, Dingziqiao Road, Wuchang Dist., Wuhan City, China
Contact name:Luo Zhengang
PSL (WUHAN) SMART EQUIPMENT CO.LTD. |
|
|
Horizontal three rolls hydraulic drive profile section bending machine
1. Three roll hydraulic drive with advantage of stable.
2. Two side rolls adjust the curvature with grating ruler to control the range of curvature. The two side rolls can adjust curvature simultaneously or separately. Easy operation and high accuracy.
3. Controlled by Touch Screen and PLC.
4. Malfunction auto detective and warning system. Screen will show all malfunction information and solution.
5. Calculator shows the processed quantity at any time.
6. All data can stock in PLC for ever and can be used at any time
7. With manual, semi-auto and full auto operation.
8. Able to bend different profiled like angle iron, U beam, I beam, flat bar, round tube and so on.
Working Principle:
When workpeice is impacted within middle roll and side rolls it brings bending moment. Force of friction drives the workpiece when roller rolling. Then the workpiece turns to circle under the bending moment and friction of force.
This machine uses the setup of oil vat entering and PLC control and has achieved high automation. The precision of the oil vat entering is controlled by grating ruler which ensures precision of the diameter of workpeice. The entering of oil vat drives the rolling arm rotating around the mandrel and then brings the position change of side roller to change the radius of workpiece.
Processing capacity:
Round Pipe | Max. OD | 177.8 |
| wall thickness | 10 | |
| min.bending dia. | 2500 | |
Round Steel Rod | Max. OD | 110 |
| min.bending dia. | 800 | |
Square Pipe | max.section | 140x140 |
| wall thickness | 8 | |
| min.bending dia. | 2400 | |
| Flate Pipe bend | max.section | 200 |
| wall thickness | 30 | |
| min.bending dia. | 1900 | |
| Flate Pipe bend | max.section | 180 |
| wall thickness | 70 | |
| min.bending dia. | 800 | |
| Angle Steel | max.section | 180×18 |
| min.bending dia. | 3200 | |
| Angle Steel | max.section | 180×18 |
| min.bending dia. | 3200 | |
| U steel | U steel Model | 18 |
| min.bending dia. | 1600 | |
| U steel | U steel Model | 18 |
| min.bending dia. | 1600 | |
| U steel | U steel Model | 18 |
| min.bending dia. | 2800 | |
| T steel | T steel Model | 130x12 |
| min.bending dia. | 2000 | |
| T steel | T steel Model | 120x11 |
| min.bending dia. | 1800 | |
| Rectangle Pipe | Rectangle Pipe model | 160x80x8 |
| min.bending dia. | 2500 | |
| Rectangle Pipe | Rectangle Pipe model | 150x100x6 |
| min.bending dia. | 2500 | |
| H Steel | H Steel model | 16 |
| min.bending dia. | 2000 | |
| H Steel | H Steel model | 25 |
| min.bending dia. | 4000 | |
| Square Steel | Square Steel model | 100 |
| min.bending dia. | 800 |
Main Technical parameters,
Technical Parameter: | W24S | ||||||
140 | 180 | 260 | 320 | 400 | 500 | ||
Profile bending Mold(Max) | 140 | 180 | 260 | 320 | 400 | 500 | |
CoilingSpeed (m/min) | 5 | 4 | |||||
Yielding Limit of Sheet Matal(mpa) | △S=250 | ||||||
 | Profile(Max)mm | 140*16 | 150*16 | 160*16 | 180*14 | 200*18 | 200*20 |
Bending diameter (Min)mm | 2400 | 2600 | 2600 | 3600 | 3600 | 4000 | |
Profile(Mix)mm | 50*5 | 50*6 | 60*6 | 70*6 | 75*6 | 85*6 | |
Bending diameter (Min)mm | 1000 | 1200 | 1200 | 1500 | 1400 | 1600 | |
 | Profile(Max)mm | 150*16 | 160*16 | 180*14 | 200*18 | 200*24 | 250*25 |
Bending diameter (Min)mm | 2200 | 2000 | 2500 | 3600 | 3600 | 4000 | |
Profile(Mix)mm | 50*5 | 50*6 | 60*6 | 70*6 | 75*6 | 85*6 | |
Bending diameter (Min)mm | 800 | 1000 | 1000 | 1300 | 1500 | 1600 | |
 | Material | 30 | 32 | 36 | 40 | 45 | 50 |
Bending diameter (Min)mm | 1200 | 1500 | 1800 | 2000 | 2000 | 2400 | |
 | Material | 30 | 32 | 36 | 40 | 45 | 50 |
Bending diameter (Min)mm | 1700 | 1800 | 1800 | 2000 | 2000 | 2400 | |
 | Profile(Max)mm | 280*50 | 300*50 | 330*50 | 360*60 | 400*75 | 500*76 |
Bending diameter (Min)mm | 1300 | 1500 | 1900 | 2000 | 2400 | 2400 | |
 | Profile(Max)mm | 150*40 | 180*30 | 190*40 | 190*50 | 200*50 | 200*60 |
Bending diameter (Min)mm | 1500 | 2000 | 2000 | 2400 | 2200 | 2500 | |
 | Profile(Max)mm | 168*6 | 168*8 | 219*8 | 245*8 | 273*8 | 323*10 |
Bending diameter (Min)mm | 2000 | 2000 | 3500 | 3000 | 3500 | 4200 | |
 | Profile(Max)mm | 100 | 110 | 120 | 135 | 150 | 160 |
Bending diameter (Min)mm | 1200 | 1300 | 1350 | 1800 | 2000 | 2000 | |
 | Profile(Max)mm | 125*10 | 140*10 | 150*10 | 165*10 | 180*12 | 200*12 |
| Bending diameter (Min)mm | 2500 | 3000 | 3000 | 3500 | 3500 | 500 | |
