|
[China]
Trade Verify
Address: No. 78 Tongxin Road, Tongan Town, High-tech Development Zone, Suzhou City, Jiangsu Province, China
Contact name:Jack Shi
Suzhou Cherish Gas Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Large LCD Screen Display Dual Outlet Movable Home Oxygen Concentrator With 0.5-10L Flow Rate 93% Purity For Home Care
Product Parameter
| Oxygen Concentrator Flow Rate | 0.5-10L min |
| Purity | 93+/-3% |
| Power Supply | AC220V+/-22V 50Hz+/-1Hz |
| Dual Flow | 2 x HEPA filters |
| Display | LED Display |
| Power | ≦800VA(W) |
| Max Outlet Pressure | 55kpa(0.55bar) |
| Noise | ≦50dB(A) |
| Service Environment | Temperature:5 - 40℃; Humidity: Under 30 - 75% RH(No condensation) |
| Overall Dimensions(mm) | (W)360 x (D)250 x (H)630mm |
| Net Weight/Gross Weight | 32kgs/40kgs |
| Characteristic | Instant humidifying cup for easy access; Touch-controlled flow regulation, more accurate and convenient; High efficiency lithium molecular sieve; Low decibel operation, quiet oxygen. |
| Certificate | CE Certificate |
| Warranty period | 1 years for whole macnine; 3 years for Air Compressor; Lifelong maintenance. |
Can be used with CPAP/APAP
Features:
* Medical level, with stable high oxygen purity 93%±3%
* Real Dual-flow
* New design, hot-selling model
* 10L/min large flow
Working Principle Description
The concentrator takes clean compressed air as raw material and
uses high efficiency lithium molecular sieve as adsorbent to
produce oxygen from air under certain pressure.
The compressed air after purified and dried , were carried out in
the adsorber by pressuring adsorption and decompression desorption.
Due to the aerodynamic effect, the diffusion rate of nitrogen in
the pores of lithium molecular sieve is much higher than that of
oxygen. Nitrogen is preferentially adsorbed by lithium molecular
sieve, and oxygen is enriched in the gas phase to form finished
oxygen.
Then, the adsorbent desorbs the adsorbed impurities, such as
nitrogen, to achieve regeneration after decompression to
atmospheric pressure. Generally, two adsorption towers are set in
the system, one is for adsorption and oxygen generation, the other
is for desorption and regeneration.
PLC program controller is used to control the opening and closing
of pneumatic valve to make the two towers circulate alternately, so
as to obtain higher purity oxygen (93%±3).
