Home Companies Zhejiang Zhongde Electric Co., Ltd.

Magnetic Metal PNP Inductive Proximity Switch High Switching Frequency

Zhejiang Zhongde Electric Co., Ltd.
Active Member

Contact Us

[China] country

Address: No. 328, Jinyang Road, Chaoyang Village, Liushi Town, Yueqing City, Zhejiang Province, China

Contact name:Carrie Zhou

Inquir Now

Zhejiang Zhongde Electric Co., Ltd.

Magnetic Metal PNP Inductive Proximity Switch High Switching Frequency

Country/Region china
City & Province chaoyang zhejiang
Categories Other Switches
InquireNow

Product Details

Magnetic Metal PNP Inductive Proximity Switch High Switching Frequency

 

Features

  1. Economical and simple operation
  2. Long life and high reliability, strong environmental resistance
  3. Red LED reality can detect sensor working status
  4. IP67 protection structure (IEC)
  5. Reverse power protection, short circuit protection, can be directly connected to the PLC
  6. Three-wire PNP normally closed DC

 

Parameter

Lag distanceLess than 10% of the detection distance
Detecting objectsMagnetic metal (detection distance is reduced when non-magnetic metal)
voltageDC : DC 12~24 (6~36V) pulse (p-p) below 10%
AC : AC 110~220V (36~250V) 50/60Hz
Current consumptionN.P : ≤13mA
D : ≤0.8mA
A : ≤1.7mA
Control outputN.P : ≤300mA
D : ≤200mA
A : ≤400mA
Loop protectionN.P.D : reverse connection protection, surge absorption, load short circuit protection
A : surge absorption
Ambient temperature-30~+65°C (no icing, no condensation)
Ambient humidity-35~95%RH
Insulation resistance50MΩ or more (DC500 megohmmeter) (between charging part and housing)
Withstand voltageAC 1000V 50/60HZ 1min (between charging part and Housing)
Temperature effect-30~+65°C: detection distance error ±15% at +23°C
-25~+60°C: detection distance error ±10% at +23°C
Voltage effect6-36V (90-250V) : ±15% of detection distance error
10-30V (220V) : ±10% of detection distance error
Protection levelIP67 (IEC)
MaterialHousing: ABS
Detection surface: ABS

 

Note:Please read the "Precautions" of the product manual before use.

 

Introduction

Two specific types sensors are available; PNP and NPN. The difference is a result of the internal circuit design and type of transistors used.

 

PNP and NPN has nothing to do with whether the sensor is normally open (N/O) or normally closed (N/C), i.e. a PNP sensor may be either N/O or N/C as can an NPN be either N/O or N/C.

 

Why two types?

The selection of a PNP sensor verses an NPN sensor is determined by the nature of the circuit the device is to be used in. When used in a traditional relay type control circuit, it is normally possible to use either the PNP or the NPN type of sensor.

 

Hot Products

High Durability PNP NO Proximity Sensor Three - Wire IP67 Protection Structure Description The PNP ...
Square PNP Proximity Switch , PNP Proximity Sensor Good Anti Interference Ability Description These ...
Normally Open 3 Wire PNP Proximity Sensor High Reliability With CE Certification About us Zhongde is ...
Lightweight PNP Proximity Switch , Cylinder Proximity Switch Anti Vibration Our service Our company ...
Magnetic Metal PNP Inductive Proximity Switch High Switching Frequency Features Economical and ...
Small Size DC PNP Proximity Switch , PNP Type Sensor Oil Prevention Applications PNP Proximity ...