High Performance Environmental Test Chamber / Flammability Fire Testing 5660 Cone Calorimeter

High Performance Flammability Fire Testing ISO 5660 Cone Calorimeter

Description:

This test method is used to measure the critical radiant flux of horizontally-mounted floor covering systems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials. Such as: textile carpets, soft wood, wood, rubber and plastic flooring and floor boards spray material. The apparatus can be reacted combustion performance flooring including the use of a substrate, backing material, backing material, or flooring materials other changes are likely to affect the test results, which is used to test and describe under controlled conditions in the laboratory, shop combustion characteristics to the material paired heat of reaction to fire.

Standard:

GB / T11785 "flooring combustion performance measurement - a radiant heat source”

ISO9239-1:2002 “flooring combustion performance Part 1-the combustion performance is determined with radiant heat resource”

ASTM E648:Standard Test Method for Critical Radiant Flux of Floor-covering Systems Using a Radiant Heat

ASTM E970:Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

NFPA 253:Standard Test Method for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source

Specification:

 Radiant cone:

heating power: 5kw, radiation intensity: 100kw /m² quipped with three thermocouples to measure the temperature.

 Exhaust system: 

Consist of Centrifugal fan, hood, fan intake and exhaust pipe and orifice flow meter. Use frequency fan control exhaust flow 0.012m³/s~ 0.035 m³/s automatic adjustment with computer;

 Oxygen analyzer:  

Siemens paramagnetic analyzer O₂ Measuring range:0~ 25%

 Control system:

 Detection control program and control ZWH4500 acquisition card.

Diaphragm pump:

Flow rate:33L/min; vacuum degree: 700mm Hg;

Filter:

imported dust filter consist of 0.5mm PTFE with filtration solid material inside;

imported water filter consist of PTFE which liquid can go through the peristaltic pump in the bottom.

Condenser:

Imported Tecumseh compression condenser  Cooling capacity: 320KJ/h;

Control System:

1. Adopt computer control system,include computer and printer each one,Windows XP operating system.

2. A light transmittance measurement software, and reports can be output curve.

3. The device has the following safety devices: power overload, short circuit protection, overload control loop.

Company introduction

Dongguan Gaoxin Testing Equipment Co., Ltd is a high tech company specialized in producing kinds of testing equipment which was established in 2007, located in manufacturing centre of China-Dongguan City where is close to Guangzhou city and Hong Kong.

Our advantages:

(1) Speciality in testing equipment

(2) Various products to choose from

(3) Accept customization

(4) Excellent after-sale service