|
[China]
Trade Verify
Address: 5f, Bldg 2a, Mingzhu Industrial Park 106 Chuangxin Ave, High-Tech Zone, Hefei, Anhui, China
Contact name:
Hefei WNK Smart Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Traditional fire protect
Because of the isolation of each buildings in the traditional
protection, leading to fire protection management be scattered and
inefficient. It was found that the fire was not timely, and the
alarm personnel can not descriv clearly due to the lack of fire
knowledge and tension. These cause the fire spread and the valuable
rescue time delayed, which often cause significant losses.
Intelligent fire protect
Intelligent Fire uses advanced IoT means to monitor the operating status of the fire protection system in real time; instantly discover the fire and push the alarm information to the IoT unit and the fire department to achieve rapid alarm and save valuable rescue time; use technology to reduce and Avoid fire damage.
Intelligent fire protect
Intelligent Fire uses advanced IoT means to monitor the operating status of the fire protection system in real time; instantly discover the fire and push the alarm information to the IoT unit and the fire department to achieve rapid alarm and save valuable rescue time; use technology to reduce and Avoid fire damage.
WNK Intelligent fire special sensor are widely used to smart fire.
In addition, in the spray pipe, once the open flame is encountered, the spray device is sprayed to spray water, and the pressure inside the water pipe is inevitably lowered. Therefore, using the pressure sensor to detect the water pressure in the spray pipe can reflect whether the spray is activated or not. At the same time, the pressure pump is activated to enhance the water pressure in the fire protection pipe to ensure the fire water supply.
The pressure sensor converts the pressure (generally the pressure of the liquid or gas) into an electrical signal output, which in turn can be used to measure the level of the static fluid and can therefore be used to measure the level of the hydrant pipe.
Monitoring field data collection
The sensor can be installed on the monitoring site or integrated into various types of fire-fighting equipment, such as fire hydrants, fire exits, fire hoses, etc. The sensors can collect real-time and fire equipment operation data, and can also transmit these data to the server, and recive the command data sent by the server to monitor the running status of the fire fighting equipment.
Monitoring on-site data transmission
After the sensor collects the data, it can send the data to the aggregation router. After the aggregation router receives the data, it can send the network to the server to monitor and store the data information.
Monitoring field data analysis
After the server receives the data, it can analyze the operating
status of the fire equipment to find out if the fire equipment is
working well. If there is a short-term failure in the fire-fighting
equipment, you can replace the new parts in time; if the
fire-fighting equipment is not working properly, you can replace
the new equipment in time.
As the most common data acquisition, transmission and analysis hardware, the sensor has strong information processing and computing service capabilities, it can sense the field information of the objective world, send this information to the server for processing and processing, and provide intelligent decision support for the fire protection industry.
FAQ
Q: Are you trading company or manufacturer ?
A: We are a manufacturer since the year 2004, committed to producing high accuracy, long-term stability, cost-efficient pressure/level/temperature measuring instruments.
A: Our factory is cerrified under ISO 9001-2015. All products are completed with temperature compensation and 48 hours aging test before shipment.
A: 12 month from shipment date, for non-man-made damages.
A: Small orders are delivered with DHL, Fedex, TNT, UPS , with delivery time in 4 - 5 business days.
Large orders are recommended to ship by sea
Contact me at:
