|
[China]
Trade Verify
Address: No.86,Dicui Road,B5Building, Fourth Floor,Room 401
Contact name:wang
Wuxi Consensic Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Features
■High accuracy (±2.0% F.S accuracy)
■Linear output and no temperature compensation required
■Long-term stability with minimal zero drift
■Fast response time (20 ms response time)
■The flow rate range is 0-60m/s, and the strong impact resistance
is 100g
■Solid-state sensing core (no surface voids or fragile membranes),
resistant to clogging and pressure shock
■Output mode: analog voltage output (1 to 5V), frequency output
(2.05~11.69KHZ), two kinds of optional
■In terms of reliability, it can be adapted to the measurement of
relatively humid gases
■Operating temperature: -40°C to 125°C, Storage temperature: -40°C
to 125°C, humidity: 0 to 100%RH
■The sensor is resistant to condensation
CAFS1000C series MEMS air flow sensor (i.e., air flow meter) is
used in modern automotive electronic control fuel injection system
(EFI), generally installed on the air intake between the air filter
and the throttle body, used to measure the amount of air inhaled in
the engine, and its output signal is used as the main parameter to
control the amount of fuel injection in the automobile engine fuel
EFI system, determines the power, economy and emission performance
index of the engine. In order to obtain the best fuel concentration
mixture in a variety of operating conditions, the amount of air
drawn into the engine at each moment must be correctly measured and
the fuel injection calculated and controlled as an electronic
control unit
The main basis for the amount. Therefore, automotive air flow
sensors play an extremely important role in saving energy
consumption and controlling pollutant emissions in modern vehicles.
CAFS1000C series products have been verified in the automotive and
related industries for many years, and have been fully able to meet
the high reliability, high stability, and high reliability of
automotive-grade use.
High accuracy and low cost. The application and promotion of
products will be very broad.
Output mode | Frequency output 2.05~11.69 Analog outputs 1-5
| KHz
V |
Optional |
| temperature | -40~125 | ℃ | |
| Ingress protection | IP40 | ||
| Calibration method | Air, 20°C, 101.325kPa | ||
| Overall material | ABS | ||
Functional items | CAFS1000C | ||
| Performance parameters | unit | remark | |
| Flow range | 10-800 | Kg/h | Customizable |
| Supply voltage | 14 | VDC | |
| precision | ±2.0 | % FS | |
| repeatability | <0.5 | % | |
| Response time | 20 | ms | Optional |
| Maximum pressure | 0.3 | MPa | |
