4mm Sheet Metal Manual Press Brake 100T Capapcity new press brake dies
new products-the sheet metal press brake/ plate press brake/ sheet
bending machine
used sheet press brake machine Description
- Brand New 8 feet Hydraulic Press Brakes for sale - currently in
stock
- Is the safest, and most expensive. They are generally slower and
have more of a precise bend.
- Hydraulic Press Brakes have a better control when inching down and
setting up for your bend,
- they also can return to the top at any time.Hydra-Mechanical Press
Brakes
- Rotary hydraulic cylinder turns the eccentric shaft by means of
rigid mechanical linkage to both
- ends of the ram, distributing power equally over its full length.
This basic power principle offers
- the operational control and safety of the hydraulic principle plus
the rigid ram alignment,
- accuracy and operating speeds of the mechanical press brakes. With
a Hydra-Mechanical
- press brake design the operator is in full command of the job. He
can meter out just the right
- amount of fluid to move the ram the exact distance needed. With a
Hydra-mechanical press brake
- you can easily inch the ram down for scribed line work, and easily
locate the stroke bottom for
- setting up. This gives more accuracy, less operating time, and less
training is needed.
- The Hydra-mechanical advantage allows you to instantly stop or
start anywhere in the cycle,
- and allow reversal of stroke direction at any position. Different
from a mechanical press brake
- that can only return the ram to the top after the cycle is complete
China plate press brake Specifications
| No. | Name | Unit | Parameter |
| 1 | Nominal force | kN | 1000 |
| 2 | Length of worktable | mm | 3100 |
| 3 | Distance between housing | mm | 2560 |
| 4 | Throat depth | mm | 320 |
| 5 | Ram Stroke | mm | 100 |
| 6 | Maximum opening height | mm | 365 |
7 | Speed of ram stroke | Idle running | mm/s | 60 |
| Pressing | mm/s | 8 |
| Retract | mm/s | 40 |
8 | Internal gear pump | Model | IPH-6B-80-11 |
| Pressure | MPa | 25 |
| Flow | ml/r | 80 |
9 | Main motor | Model | Y2-225M-4B35 |
| Power | kW | 45 |
| Speed | r/min | 1480 |
10 | Backgauge motor | Model | SGMGH-09A |
| Power | kW | 0.9 |
| Speed | r/min | 1500 |
| 11 | Rated pressure of hydraulic system | Mpa | 25 |
12 | Overall Dimensions | Length | mm | 4300 |
| Width | mm | 1820 |
| Height | mm | 2495 |
| 13 | Weight of machine | kg | 9000 |
metal sheet press machine Structure
- CNC press brakes are the latest in manufacturing. They can have
multiple axis Backgauges,
- and you can program them to do different bends. This is the most
expensive and the best for
- production. That should give you a basic rundown on how to purchase
a press brake
- Totally European design,streamlined looking,Frame: consists of
right and
- left wall boards, working table, oil box, slot steel and etc. The
stress of the
- welded parts can be eliminated by vibration. The machine enjoys
high accuracy
- and high strength and can be transported
- easily
- Welded structure: the stress of the welded parts can be eliminated
by vibration;
- so this forging press gives high accuracy.
- High accuracy,high efficiency,simple and convenient operation,good
performance,
- favorable price and best service.
hydraulic sheet bending machine Information
- All hydraulic press brakes are manufactured to the highest
standard, with strict quality control
- to achieve a long life of minimal maintenance.
- The brakes range from 44 tons to 880 tons. Two cylinders power all
models, and a torsion bar
- is used to ensure parallelism of the top beam. The two cylinders
working to a positive depth stop
- do stroke control of the bending beam. The top ram returns to the
top position after the pressure
- has been reached. The remote pressure regulator allows the working
pressure to be reduced for
- working with lighter materials. Push buttons and the fine
adjustment hand wheel electrically control
- the setting of the bending beam. The readout enables the operator
to recall previously set depth to accurately bend other thickness
without waste of production time and materials. These models
- have an automatic 2-speed operation giving fast approach, slow
bending, and fast return. The changeover from fast to slow approach
is preset by means of electrical and mechanical control.
- Machines can be built from 6′ to 20′ in length.
4m length press brake machine Construction
- Hydraulic top-drive, steadiness and reliability
- Steel-welded construction, vibration to eliminate stress, with high
strength and
- good rigidity
- Mechanical stop, steel torsion bar to maintain synchronization,
high precision
- Motorized-adjusting device of back gauge and ram's stroke, fine
adjusting by
- hand wheel, numerical display
- Travel limit protection, full machine guarding with safety
interlocker
Optional equipment:
1. additional control system: E21,DAC-310 system and DATC660
2. screw of bakc gauge adopt ball screw
3. larger throat gap,
4. stainless steel blade H13
5. rear light curtain protection device
6. central motorised lubrication system
7. imported pump and vlave
Packaging & Delivery:
Packaging Details: Plastic-film, wood package or any other packing
that customer need.
Delivery Detail: about 30 days after deposit
download brochure here
hydraulic press brake.pdf
