|
[China]
Trade Verify
Address: QIANQIAO WUXI JIANGSU PROVINCE CHINA
Contact name:Tony Zou
JINQIU MACHINE TOOL COMPANY |
|
Verified Suppliers
|
|
|
Stanless Steel V Grooving Machine Foot Pedal Notching 6100mm Long Workpiece
V grooving machine, V groover,V cutting machine,sheet metal V grooing machine,CNC Notching machine
CNC V grooving machine Introduction
This equipment is fully CNC V Groover Machine for metal sheet. It adopts
advanced CNC system and innovative design with the advantages
of high processing precision, simple operation, no noise, no vibration and so on.
It is widely used in the sheet metal V-groove, U-groove
and other irregular groove processing (including stainless steel, aluminum,
aluminum plate, copper, iron, plastic, wood, acrylic panels and
other special plates.). Particularly, it is applicable to the V-groove processing
of sheet metal before bending .
CNC sheet V groover Describtion
This V cutter machine composed of bed, beam, tool rest, cnc system, pneumatic material hold-down unit, compressed air blowing and cooling system. It is a gantrytype grooving machine.
The bed and beam is box-type structure. Steel welded structure, tempering aging to eliminate stress. Good rigidity and accuracy.
Tool rest action of moving forward and backward(Y1 axis), up and down(Z axis),and forward and backward on hold-down(Y2 axis) are all controlled by cnc system.
AC Servo drive, ball screw transmission, with high accuracy and location accuracy.
Left and right moving of beam(X axis) use ac frequency conversion motor drive,
transmission motion with gear and rack, with high speed, strong loading capacity.
The pneumatic hold-down system ensure good machining precision and repeat accuracy, which can automatically adapt different sheet thickness
Rear Feeding Device for plate V grooving machine
Carrier Of Blades of CNC sheet metal V grooving machine
Worktable And Pneumatic Hold Down for sheet V grooving machine
Technical Data of 6mm stainless steel V grooving machine
| Item | 1250/6000 | 1250/5000 |
| Cutting length | 6000mm | 5000mm |
| Cutting width | 1250mm | 1220mm |
| Sheet thickness | 0.6-4mm | 0.6-4mm |
| Max. Cutting speed | 0-1000mm/sec | 0-1000mm/sec |
| Max. X Dolly return speed | 0-1000mm/sec | 0-1000mm/sec |
| Y axis moving speed | 20 m/min | 20 m/min |
| Z axis moving speed | 20 m/min | 20 m/min |
| X axis control | AC frequency driver control, Brand Delta | AC frequency driver control, Brand Delta |
| Y,Z axis control | Servo driver control, Brand Delta | Servo driver control, Brand Delta |
| Linear guide & ball screw | Taiwan HIWIN | Taiwan HIWIN |
| Bearing | SKF | SKF |
| X axis motor power | 4KW | 4KW |
| Y/Z axis motor power | 1.5/ 1.0 KW | 1.5/ 1.0 KW |
| Control system | Siemens PLC | Siemens PLC |
| Cable | Main Cable : Germany IGUS | Main Cable : Germany IGUS |
| Max cutting step | 15 cycle | 15 cycle |
| Machine dimension | 7600x2350x1550(mm) | 66200x2350x1550(mm) |
| Machine weight | 10600kg | 9300kg |
Enclosed Accessory
CNC sheet V cutting machine picture
