Active Member
|
[China]
Address: Wenchang Rd, Licang District, Qingdao, China
Contact name:Eric
Qingdao National Premium Oilwell Machinery Co.,Ltd |
|
|
These modules create added value for contractors and operators by increasing the operating range of existing mud pump
Features/Benefits:
Maximum rated working pressure: 7500 psi
Individually forged, heat-treated alloy steel
Greater resistance to cracking, longer life
Hydro-statically tested and autofrettaged for material integrity
Direct replacement for the current 7500 psi wide body module (same outside dimensions and same external and internal components except valve cover, bore seal and Falcon spring retainer)
Available 7500 P.S.I. Models include:
OILWELL A1700PT
| Item | Description | Part No. |
| Complete Assembly | 8407-7A | |
| 1 | Threaded Flange | 4475 |
| 2 | Screw Gland | 4575 |
| 3 | Plug Assembly w/Guide & Bushing | 4675-2A |
| 4 | Valve Guide | 4775-2 |
| 5 | Valve Guide Bushing | 4700-I |
| 6 | Valve Guide Screw | 4016-99 |
| 7 | Valve Cover Stud w/Nut | 4015-2 |
| 8 | Power End Stud w/Nut | 4018-68 |
| 9 | Discharge Manifold Stud w/Nut | 4017-50 |
| 10 | Liner Retainer Flange | 6407 |
| 11 | Liner Retainer Nut | 6507 |
| 12 | Suction Module Stud | 4016-97 |
| 13 | Suction Module (Studded) | 8407-11 |
| 14 | Discharge Module (Studded) | 8407-7 |
| 15 | Dowel Pin | 8488-5 |
| 16 | Wear Plate | 8407-10 |
| 17 | Valve Cover Plug Seal | P-129 |
| 18 | Module & Wear Plate Seal | 2988 |
| 19 | Wear Plate Capscrew | 4018-98 |
| Item | Description | Part No. |
| Complete Assembly | 8477-A | |
| 1 | Wear Plate | 8477-3 |
| 2 | Wear Plate Gasket | 2930-08 |
| 3 | Threaded Flange | 4475 |
| 4 | Screw Gland | 4575 |
| 5 | Plug Assembly w/Guide & Bushing | 4675-1A |
| 6 | Valve Cover Plug Seal | P-129 |
| 7 | Valve Guide | 4775R |
| 8 | Valve Guide Bushing | 4700-I |
| 9 | Valve Guide Screw | 4018-99 |
| 10 | Valve Cover Stud w/Nut | 4015-2 |
| 11 | Power End Stud w/Nut | 4017-35 |
| 12 | Liner Retainer Stud | 4018-34 |
| 13 | Liner Retainer Flange | 6477 |
| 14 | Suction Module Stud w/Nut | 4016-97 |
| 15 | Suction Manifold Capscrew (not shown) | 4017-77 |
| 16 | Suction Module (Studded) | 8477-2 |
| 17 | Discharge Module (Studded) | 8477-1 |
| 18 | Dowel Pin | 8488-5 |
| 19 | Module Gasket | 2988 |
| 20 | Discharge Manifold Stud | 4017-5 |
| 21 | Piston rod | 6278-25 |
| 22 | Sub Rod | 6279-1 |
| 23 | Piston Rod Connecting Stud | 1290-2 |
| 24 | Rod Clamp w/Spray System | 1277-CW |
| Item | Description | Part No. |
| Complete Assembly | 8488-1 | |
| 1 | Discharge Module | 8488-1 |
| 2 | Suction Module | 8488-2 |
| 3 | Screw Gland | 4575 |
| 4 | Threaded Flange | 4475 |
| 5 | Wear Plate | 8488-4 |
| 6 | Plug Assembly w/Guide & Bushing | 4675-1A |
| 7 | Liner Retainer Flange | 6488-1 |
| 8 | Liner Retainer Nut | 6588-1 |
| 9 | Module Gasket | 2988 |
| 10 | Valve Cover Plug Seal | P-129 |
| 11 | Valve Guide Bushing | 4700-I |
| 12 | Valve Guide | 4775 |
| 13 | Valve Cover Stud w/Nut | 4015-2 |
| 14 | Power End Stud w/Nut | 4016-96 |
| 15 | Liner Retainer Capscrew | 4017-4 |
| 16 | Suction Module Stud w/Nut | 4016-97 |
| 17 | Wear Plate Gasket | 2974-I |
| 18 | Liner Retainer Screw Set | 8488-7 |
| 19 | Dowel Pin | 8488-5 |
| 20 | Discharge Manifold Stud | 4016-3 |
| 21 | Valve Guide Screw | 4018-88 |
| 22 | Piston Rod | 1290-25 |
| 23 | Sub Rod | 1290-1 |
| 24 | Piston Rod Connecting Stud | 1290-2 |
| 25 | Rod Clamp w/Spray System | 1290-CW |
| Item | Description | Part No. |
| Complete Assembly | 8490-2A | |
| 1 | Threaded Flange | 4475 |
| 2 | Liner Wear Plate | 8490-3 |
| 3 | Module and Wear Plate Gasket | 2988 |
| 4 | Screw Gland | 4575 |
| 5 | Plug Assembly w/Guide & Bushing | 4675-2A |
| 6 | Plug Seal | P-129 |
| 7 | Valve Guide | 4775-2 |
| 8 | Valve Guide Bushing | 4700-I |
| 9 | Valve Guide Stud w/Nut | 4016-99 |
| 10 | Valve Cover Stud w/Nut | 4015-2 |
| 11 | Power End Stud w/Nut | 4016-9 |
| 12 | Liner Retainer Capscrew | 4017-36 |
| 13 | Liner Retainer Flange | 6490-3 |
| 14 | Liner Retainer Pilot Ring | 8422-3 |
| 15 | Liner Retainer Nut | 6590-1 |
| 16 | Suction Module Stud w/Nut | 4016-97 |
| 17 | Suction Module Studded | 8490-2 |
| 18 | Discharge Module Studded | 8490-1 |
| 19 | Dowel Pin | 8488-5 |
| 20 | Discharge Manifold Stud w/Nut | 4017-46 |
| Item | Description | Part No. |
| Complete Assembly | 8476-A | |
| 1 | Threaded Flange | 4476 |
| 2 | Screw Gland | 4597 |
| 3 | Plug Assembly w/Guide & Bushing | 4676-2A |
| 4 | Valve Guide | 4776 |
| 5 | Valve Guide Bushing | 4700-I |
| 6 | Valve Guide Screw | 4016-98 |
| 7 | Valve Cover Stud w/Nut | 4015-54 |
| 8 | Power End Stud w/Nut | 4015-95 |
| 9 | Liner Retainer Capscrew | 4017-65 |
| 10 | Liner Retainer Flange | 6476 |
| 11 | Liner Retainer Nut | 6576 |
| 12 | Suction Module Stud w/Nut | 4018-17 |
| 13 | Suction Module (Studded) | 8476-2 |
| 14 | Discharge Module (Studded) | 8476-1 |
| 15 | Dowel Pin | 8488-5 |
| 16 | Wear Plate | 8476-3 |
| 17 | Valve Cover Plug Seal | P-107 |
| 18 | Module & Wear Plate Seal | 2988 |
| 19 | Piston Rod | 1286-32 |
| 20 | Sub Rod | 1286-1 |
| 21 | Rod Clamp w/Spray System | 1286-CW |
| MISSION "L" MODULE FOR BOMCO F1600 7500 PSI SWOP VERSION | QTY PER PUMP | |||
| FLUID END MODULE & ACCESSORIES | ||||
| ITEM # | SW PART # | MISSION PART # | DESCRIPTION | |
| 8404-25A | FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEMS) | 3 | ||
| 1 | 8404-26 | MODULE, SUCTION STUDDED (INCLUDES ITEMS 1, 7-8) | 3 | |
| 2 | 8404-27 | MODULE, DISCHARGE STUDDED (INCLUDES ITEMS 2-9) | 3 | |
| 3 | 4019-61 | STUD, DISCHARGE TO SUCTION MODULE | 18 | |
| 4 | 1-3/4-8 HH | 6300281 | NUT, DISCHARGE TO SUCTION STUD | 18 |
| 5 | 4017-33 | STUD, POWER END | 30 | |
| 6 | 1-1/2-8 HH | 0-7601-0630-28 | NUT, POWER END STUD | 30 |
| 7 | Feb-15 | OWA17TRSSW | STUD, THREADED RING | 72 |
| 8 | 1-1/4-7 HH | 6300200 | NUT, THREADED RING STUD | 72 |
| 9 | 8488/5/1- | 6511416 | PIN, DOWELL | 6 |
| 10 | 4019-51 | 7006444 | CAPSCREW, LINER RETAINER FLANGE 3/4-10X3 | 18 |
| 11 | 8490-28 | PLATE, LINER WEAR | 3 | |
| 12 | 2988 | 1290344 | GASKET, WEAR PLATE AND MODULE - RUBBER (SEE DATASHEET FOR ALT MATLS) | 6 |
| 13 | 568-443 | 99609443 | O-RING, WEAR PLATE | 3 |
| 14 | 6490-25 | FLANGE, LINER RETAINER (LINER BUSHING) | 3 | |
| 15 | 6590-25 | NUT, LINER RETAINER | 3 | |
| 16 | 4690-25A | ASSY, VALVE COVER PLUG (INCLUDES ITEMS 15,16, 20-22) | 6 | |
| 17 | PLUG, VALVE COVER | 6 | ||
| 18 | 4488-25 | RING, THREADED (THREADED FLANGE) | 6 | |
| 19 | 4588-25 | CAP, THREADED (SCREW GLAND) | 6 | |
| 20 | P-115 | 7207115 | SEAL, VALVE COVER PLUG - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS) | 6 |
| 21 | 4788R-25 | ASSEMBLY, VALVE GUIDE (INCLUDES ITEMS 20 & 21) | 6 | |
| 22 | 4700I | *20200004 | BUSHING, VALVE GUIDE (BUNA) | 6 |
| 23 | 4018-18 | 700030711 | SCREW, VALVE GUIDE | 12 |
| 24 | 4018-19 | 700048511 | CAPSCREW, SUCTION MANIFOLD | 24 |
| 25 | 568-442 | 99609442 | GASKET, SUCTION MANIFOLD | 3 |
| 26 | 8376-25MOD | MANIFOLD, DISCHARGE | 1 | |
| 27 | 2988 | 1290344 | SEAL, DISCHARGE MANIFOLD | 3 |
| 28 | 8590/6/1- | SUCTION MANIFOLD | 1 | |
| MISSION "L" MODULE FOR GARDNER DENVER PZL W/ 7500 PSI SWFE | QTY PER PUMP | |||
| FLUID END MODULE & ACCESSORIES | ||||
| ITEM # | SW PART # | MISSION PART | DESCRIPTION | |
| 1 | 8477-27 | DISCHARGE MODULE, STUDDED | 3 | |
| 2 | 8477-26 | SUCTION MODULE,STUDDED | 3 | |
| 3 | 4019-44 | STUD, DISCHARGE TO SUCTION MODULE | 18 | |
| 4 | 1-3/4-8 HH | NUT, DISCHARGE TO SUCTION STUD | 18 | |
| 5 | 8488/5/1- | 6511416 | DOWELL PIN | 3 |
| 6 | 8477-30 | LINER WEAR PLATE | 3 | |
| 7 | 2988 | 1290344 | WEAR PLATE AND MOD GASKET - RUBBER (SEE DATASHEET FOR ALT MATLS) | 6 |
| 8 | 4019-46 | STUD, POWER END | 24 | |
| 9 | 1-1/4-8 HH | NUT, POWER END STUD | 24 | |
| 10 | 4019-45 | STUD, LINER RETAINER | 24 | |
| 11 | 1-1/4-7 HH | NUT, LINER RETAINER STUD | 24 | |
| 12 | 6477-25 | LINER RETAINER FLANGE | 3 | |
| 13 | 6577-25 | LINER RETAINER NUT | 3 | |
| 14 | 8477-29 | RING. ALIGNMENT | 3 | |
| 15 | 4015/2/1- | OWA17TRSSW | STUD, THREADED RING | 72 |
| 16 | 1-1/4-7 HH | 6300200 | NUT, THREADED RING STUD | 72 |
| 17 | 4488-25 | FLANGE, VALVE COVER | 6 | |
| 18 | 4588-25 | THREADED CAP (SCREW GLAND) | 6 | |
| 19 | 4688-25 | VALVE COVER ASSEMBLY (INCLUDES ITEM #'S 21,23 & 25) | 6 | |
| 20 | VALVE COVER (PLUG) | 6 | ||
| 21 | P-115 | 7207115 | VALVE COVER PLUG SEAL - RUBBER (SEE DATASHEET FOR ALTERNATE MATERIALS) | 6 |
| 22 | 4788-25R | VALVE GUIDE (INCLUDES BUSHING) | 6 | |
| 23 | 4700-I | PZ789VGI* | BUSHING, VALVE GUIDE | 6 |
| 24 | 4018-18 | 700030511 | VALVE GUIDE SCREW | 12 |
| 25 | 4017-77 | 700044111 | SUCTION MANIFOLD CAPSCREW W/LOCKWASHER | 24 |
| 26 | 8577-25 | SUCTION MANIFOLD | 1 | |
| 27 | AJO-245 | SUCTION MANIFOLD SEAL | 3 | |
| 28 | 8377-27 | DISCHARGE MANIFOLD (F0R SERIAL # 9223 AND ABOVE) | 1 | |
| 29 | 8377-25 | DISCHARGE MANIFOLD (SERIAL # 9222 AND BELOW TO NOT RELOCATE DISC PIPING ) | ||
| 30 | 4019-45 | STUD, DISCHARGE MANIFOLD | 12 | |
| 31 | 1-1/4 -7 HH | NUT, DISCHARGE MANIFOLD STUD | 12 | |
All our fluid end parts are manufactured to API 7K quality standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.
All our fluid end parts are manufactured to API 7K quality standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.
Brewster ® Mud Pumps B-550 • B-750 • B-1000 • 1100T • B-1300
Continental Emsco ® Mud Pumps F-350 • F-500 • F-650 • F-800 • F-1000 • FA-1300 • FB-1600 FB1600
Gaso ® Mud Pump 1563 • 1740-55 • 1844-60 • 2010-50 • 2200-49 • 2651 • 2652
Gardner Denver ® Mud Pumps
PAH • PZ-7 PZG • PZ-8 PZH • PZ-9 PZJ • PZ-10 PZK • PZ-11 PZL
Gardner Denver ® Well Service TEE • PE-5 • PA-8 • PAH • PJ-8 • TGF-225
Gardner Denver ® Continuous Duty GD-55T • GD-60T • GD-100T • GD-125T • GD-150T • GD-180T • GD-200T
Ideco ® Mud Pumps MM-200 • MM-300 • MM-500 • MM-500F • MM-550
Ideco ® Mud Pumps MM-550F • MM-700 • MM-700F • T-500
Ideco ® Mud Pumps T-500 • T-800 • T-1000 • T-1300 • T-1600
National ® J Series Mud Pumps J-30 • J-60 • J-100 • J-165 • J-275 • J-375 • J-625 • JWS-340 • JWS-400
National ® Mud Pumps K-280 • K-380 • K-500 • K-500A • K-700A
National ® P Series Mud Pumps 7P-50 • 8P-80 • 9P-100 • 10P-130 • 12-P-160 / 12P-160 / 12P160
Oilwell ® Mud Pumps A-350-PT • 560-PT • A-560-PT • 850-PT • A-850-PT • 1100-PT
Oilwell ® Mud Pumps A-1100-PT • 1400-PT • A-1400-PT • 1700-PT • A-1700-PT / A1700-PT
Oilwell ® Plunger Pumps C-323 through B-558 • SA-640-50 through SB-644-B
OPI ® Mud Pumps 350-D • 00-DL • 700-HDL • 1000-HDL
Wheatley ® Mud Pumps 1036 • 6070 • 7024 • 7036
Fluid End Modules
National® - Oilwell® - Continental Emsco® - Gardner Denver® - Ideco® - Skytop Brewster®
Pulsation Dampener
Hydril Type "K" Pulsation Dampener
Popular Mud Pump Spare Parts
Mud Pump Manufactures and Models include:
Brewster Mud Pumps
B-550 | B-750 | B-1000 | 1100T | B-1300
Continental Emsco Mud Pumps
FF-FXF | FG-FXG (A thrugh L) | FD-FXX | FC-FXX | FD-FXD | FC-FXD | FY-FXD
Continental Emsco Mud Pumps
GP-GXP | GR-GXP | GP-GXR | GR-GXR |PA-8 | PAH
Continental Emsco Mud Pumps
PJ8 | PZ-7 | PZ-8 | PZ-9 | PZ-10 | PZ-11 | PXL
Ellis Williams (Luko) Mud Pumps
WW-440 | 14W-400 | 15W-600 | 9W-1000
Gaso Mud Pump
1563 | 1740-55 | 1844-60 | 2010-50 | 2200-49 | 2651 | 2652
Gardner Denver Mud Pumps
FF-FXF;FG-FXG;A thru L FD-FXX FC-FXX FD-FXD FC-FXD FY-FXD GP-GXP GR-GXP GP-GXR GR-GXR PA-8 PJ8 PZ-7 PZ-8 PZ-9 PZ-10 PZ-11 PXL
Ideco Mud Pumps
MM-200 | MM-300 | MM-500 | MM-500F | MM-550
Ideco Mud Pumps
MM-550F | MM-700 | MM-700F | T-500
Ideco Mud Pumps
T-800 | T-1000 | T-1300 | T-1600
National Mud Pumps
C-150 | C-250 | C-350 | E-500 | E-700 | G-700 | G-1000
National Mud Pumps
K-280 | K-380 | K-500 | K-500A | K-700A
National Mud Pumps
7P-50 | 8P-80 | 9P-100 | 10P-130 | 12P-160
Oilwell Mud Pumps
6P-HD | 610-P | 212-P | 214-P | 218-P
Oilwell Mud Pumps
350-PT | 560-PT | A-560-PT | 850-PT | A-850-PT | 1100-PT
Oilwell Mud Pumps
A-1100-PT | 1400-PT | A-1400-PT | 1700-PT | A-1700-PT
OPI Mud Pumps
350-D | 700-HDL | 1000-HDL
Wheatley Mud Pumps
1036 | 6070 | 7024 | 7036
Wilson Mud Pumps
600 | 900
